If I’m reading this right, this is pretty wild. They turned a Qwen autoregressor into a diffuser by using a bunch of really clever techniques, and they vastly outperform any “native diffuser,” actually being competitive with the base model they were trained from. The obvious upside here is the massive speedup in generation.
And then through a LoRA adapter, you can ground the diffuser on the base model’s distribution (essentially have it “compare” its proposals against what the base model would’ve generated), which effectively means: exact same byte-for-byte output for the same seed, just roughly twice as fast (which should improve even more for batched tasks).
I’m not an expert, more of a “practicing enthusiast,” so I might be missing something, but at first glance, this reads super exciting to me.
I think your excitement is justified. The paper is claiming a serious bridge between AR quality and parallel decoding, and the lossless LoRA-assisted mode is the wildest part.
Because the nature of transformers is that running a bunch of pregenerated tokens through them is a parallel operation, not autoregressive. That's how it works at training time, but speculative decoding uses it at inference time. So if you just want to check whether a set of known tokens is "likely" given the base model, you can run them all through and get probability distributions, no need to sample.
It's the same reason there's a difference in speed between "prompt processing" and "generation". The former is just taking the pre-generated prompt and building the KV cache, which is parallel, not autoregressive and therefore way faster.
I haven't read TFA yet but a common technique is speculative decoding where a fast draft model will generate X tokens, which are then verified by the larger target model. The target model may accept some Y <= X tokens but the speedup comes from the fact that this can be done in parallel as a prefill operation due to the nature of transformers.
So let's say a draft model generates 5 tokens, all 5 of these can be verified in parallel with a single forward pass of the target model. The target model may only accept the first 4 tokens (or whatever) but as long as the 5 forward passes of the draft model + 1 prefill of the target model is faster than 4 forward passes of the target, you will have a speedup while maintaining the exact output distribution as the target.
I'm no expert (just a monkey... ;) ), but isn't Diffusion supposed to generate ALL of the output at once? From their diagram, it looks like their I-LDM model seems to use previously generated context to generate the next tokens (or blocks).
Block auto regressive generation can give you big speedups.
Consider that outputting two tokens at a time will be a (2-epsilon)x speedup over running one token at a time. As your block size increases, you quickly get to fast enough that it doesn't matter sooooo much whether you're doing blocks or actual all-at-once generation. What matters, then, is there quality trade-off for moving to block-mode output. And here it sounds like they've minimized that trade-off.
From our look into it - amazing speed, but challenges remain around time-to-first-token user experience and overall answer quality.
Can absolutely see this working if we can get the speed and accuracy up to that “good enough” position for cheaper models - or non-user facing async work.
One other question I’ve had is wondering if it’s possible to actually set a huge amount of text to diffuse as the output - using a larger body to mechanically force greater levels of reasoning. I’m sure there’s some incredibly interesting research taking place in the big labs on this.
The overall speed rather than TTFT might start to be more relevant as the caller moves from being a human to another model.
However quality is really important. I tried that site and clicked one of their examples, "create a javascript animation". Fast response, but while it starts like this
```
Below is a self‑contained HTML + CSS + JavaScript example that creates a simple, smooth animation: a colorful ball bounces around the browser window while leaving a fading trail behind it.
Weird; I clicked through out of curiosity and didn't get any corruption of the sort in the end result.
I also asked it some technical details about how diffusion LLMs could work and it provided grammatically-correct plausible answers in a very short time (I don't know the tech to say if it's correct or not).
I've found the latency and pricing make Mercury 2 extremely compelling for some UX experiments focused around automated note tagging/interlinking. Far more than the Gemini Flash Lite I used before, it made some interactions nearly frictionless, very close to how old school autocomplete/T9/autocorrect works in a manner that users don't even think about the processes behind it.
Sadly, it does not perform at the level of e.g. Haiku 3.5 for tool calling, despite their own benchmarks claiming parity with Haiku 4.5, but it does compete with Flash Lite there too.
Anything with very targeted output, sufficient existing input and that benefits from a seamless feeling lends itself to dLLMs. Could see a place in tab-complete too, though Cursors model seems to be sufficiently low latency already.
Thanks for the recommendation and sharing your evals, will take a closer look at them. Yes, the Mimo models are very interesting, end-to-end pricing wise especially, though in my tool call runs, GLM 4.7 Flash did slightly better at roughly equal speed and full run cost. Is of course very task dependent and both are amazing options in the price range, but latency wise, nothing feels like Mercury 2 at the moment.
Yes, nothing to write home about. It's all relative of course, what stack, what goal, what approach on which models perform best, but for regular day-to-day coding, I do not find it usable given alternatives.
Kimi, Mimimax and GLM models provide far more robust coding assistance at sometimes no cost (financed via data sharing) or for very cheap. Output quality, tool calling reliability and task adherence tend to be far more reliable across all three over Mercury 2, so if you consider the time to get usable code including reviews, manual fixes, different prompting attempts, etc. end-to-end you'll be faster.
Only "coding" task I have found Mercury 2 to have a place for code generation is a browser desktop with simple generated applets. Think artefacts/canvas output but via a search field if the applet has been generated previously.
With other models, I need to hide the load behind a splash screen, but with Mercury 2 it is so fast that it can feel frictionless. The demo at this point is limited by the fact that venturing beyond a simple calculator or todo list, the output becomes unpredictable and I struggle to get Mercury 2 to rely on pre-made components, etc. to ensure consistent appearance and a11y.
Despite the benchmarks, cost and speed figure suggesting something different, I have had the best overall results with Haiku 4.5, simply because GPT-5.4-nano is still unwilling to play nice with my approach to UI components. I am currently experimenting with some routing, using different models for different complexity, then using loading spinners only for certain models, but even if that works reliably, any model that I cannot force to rely on UI components in a consistent manner isn't gonna work, so for the time being it'd just route between less expensive and more expensive Anthropic models.
Coding wise, one more exception can be in-line suggestions, though I have no way to fairly compare that because the tab models I know about (like Cursors) are not available via API, but Mercury 2 seems to perform solidly there, at least in Zed for a TS code base.
Basically, whether code or anything else, unless your task is truly latency dependent, I believe there are better options out there. If it is, Mercury 2 can enable some amazing things.
I've been playing with a Swift implementation of a diffusion language model (WeDLM), but performance is not yet acceptable and it still generates roughly from left-to-right like a language model (just within a sliding window rather than strictly token-by-token... but that doesn't matter when the sliding window is only like 16 tokens.)
I'm not a native English speaker and every now and then I see a comment in my mother tongue (downvoted to all hell of course). It's usually some kind of offhand remark.
If I’m reading this right, this is pretty wild. They turned a Qwen autoregressor into a diffuser by using a bunch of really clever techniques, and they vastly outperform any “native diffuser,” actually being competitive with the base model they were trained from. The obvious upside here is the massive speedup in generation.
And then through a LoRA adapter, you can ground the diffuser on the base model’s distribution (essentially have it “compare” its proposals against what the base model would’ve generated), which effectively means: exact same byte-for-byte output for the same seed, just roughly twice as fast (which should improve even more for batched tasks).
I’m not an expert, more of a “practicing enthusiast,” so I might be missing something, but at first glance, this reads super exciting to me.
I think your excitement is justified. The paper is claiming a serious bridge between AR quality and parallel decoding, and the lossless LoRA-assisted mode is the wildest part.
I don't understand how you can compare against the base model output without generating with the base model, in which case what's the point?
Because the nature of transformers is that running a bunch of pregenerated tokens through them is a parallel operation, not autoregressive. That's how it works at training time, but speculative decoding uses it at inference time. So if you just want to check whether a set of known tokens is "likely" given the base model, you can run them all through and get probability distributions, no need to sample.
It's the same reason there's a difference in speed between "prompt processing" and "generation". The former is just taking the pre-generated prompt and building the KV cache, which is parallel, not autoregressive and therefore way faster.
I haven't read TFA yet but a common technique is speculative decoding where a fast draft model will generate X tokens, which are then verified by the larger target model. The target model may accept some Y <= X tokens but the speedup comes from the fact that this can be done in parallel as a prefill operation due to the nature of transformers.
So let's say a draft model generates 5 tokens, all 5 of these can be verified in parallel with a single forward pass of the target model. The target model may only accept the first 4 tokens (or whatever) but as long as the 5 forward passes of the draft model + 1 prefill of the target model is faster than 4 forward passes of the target, you will have a speedup while maintaining the exact output distribution as the target.
You would only use the base model during training. This is a distillation technique
Isn't that exactly how draft models speed up inference, though? Validating a batch of tokens is significantly faster than generating them.
presumably that happens at training time?
then once successfully trained you get faster inference from just the diffusion model
Does this mean I should switch to sglang? How hard is it to add the capability for these type of models to vLLM? Or does it already handle them?
I'm no expert (just a monkey... ;) ), but isn't Diffusion supposed to generate ALL of the output at once? From their diagram, it looks like their I-LDM model seems to use previously generated context to generate the next tokens (or blocks).
Block auto regressive generation can give you big speedups.
Consider that outputting two tokens at a time will be a (2-epsilon)x speedup over running one token at a time. As your block size increases, you quickly get to fast enough that it doesn't matter sooooo much whether you're doing blocks or actual all-at-once generation. What matters, then, is there quality trade-off for moving to block-mode output. And here it sounds like they've minimized that trade-off.
Is anyone here experimenting seriously with Diffusion for text generation? I’d love to learn about your experiences!
https://www.inceptionlabs.ai/
This startup seems to have been at it a while.
From our look into it - amazing speed, but challenges remain around time-to-first-token user experience and overall answer quality.
Can absolutely see this working if we can get the speed and accuracy up to that “good enough” position for cheaper models - or non-user facing async work.
One other question I’ve had is wondering if it’s possible to actually set a huge amount of text to diffuse as the output - using a larger body to mechanically force greater levels of reasoning. I’m sure there’s some incredibly interesting research taking place in the big labs on this.
The overall speed rather than TTFT might start to be more relevant as the caller moves from being a human to another model.
However quality is really important. I tried that site and clicked one of their examples, "create a javascript animation". Fast response, but while it starts like this
``` Below is a self‑contained HTML + CSS + JavaScript example that creates a simple, smooth animation: a colorful ball bounces around the browser window while leaving a fading trail behind it.
<!DOCTYPE html> <html lang="en"> <head> <meta charset="UTF-8"> <title>JavaScript Bounce Animation</title> <style> body, html { margin: 0; padding: 0;
```
the answer then degrades to
``` radius: BALL_RADIUS, color: BALL_COLOR, traivD O] // array of previous {x,y} positions }; ```
Then more things start creeping in
``` // 3⃣ Bounce off walls if (ball.G 0 ball.radius < 0 || ball.x + ball.radius > _7{nas.width) { ball.vx *= -1; ibSl.x = Math.max(ball.radius, Math.min(ball.x, canvbbF4idth - ball.radius)); } if
```
and the more it goes on the worse it gets
``` Ho7 J3 Works 0 Atep | Description | ```
and
``` • prwrZ8}E6on 5 jdF wVuJg Ar touc> 2ysteners ,2 Ppawn \?) balls w>SFu the 8b$] cliM#]9 ```
This is for the demo on the front page, so I expect this is a pretty good outcome compared to what else you might ask.
Weird; I clicked through out of curiosity and didn't get any corruption of the sort in the end result.
I also asked it some technical details about how diffusion LLMs could work and it provided grammatically-correct plausible answers in a very short time (I don't know the tech to say if it's correct or not).
Mercury 2 is better than that in my testing, but it does have trouble with tool calling.
I've found the latency and pricing make Mercury 2 extremely compelling for some UX experiments focused around automated note tagging/interlinking. Far more than the Gemini Flash Lite I used before, it made some interactions nearly frictionless, very close to how old school autocomplete/T9/autocorrect works in a manner that users don't even think about the processes behind it.
Sadly, it does not perform at the level of e.g. Haiku 3.5 for tool calling, despite their own benchmarks claiming parity with Haiku 4.5, but it does compete with Flash Lite there too.
Anything with very targeted output, sufficient existing input and that benefits from a seamless feeling lends itself to dLLMs. Could see a place in tab-complete too, though Cursors model seems to be sufficiently low latency already.
If you like Mercury 2 you should try Xiaomi Mimo-v2-flash.
I have an agentic benchmark and it shows Mercury 2 at 19/25 in 58 seconds and Mimo v2 Flash at 22/25 in 109 seconds
https://sql-benchmark.nicklothian.com/?highlight=xiaomi_mimo... (flip to the Cost vs Performance tab to see speed more graphically too)
Thanks for the recommendation and sharing your evals, will take a closer look at them. Yes, the Mimo models are very interesting, end-to-end pricing wise especially, though in my tool call runs, GLM 4.7 Flash did slightly better at roughly equal speed and full run cost. Is of course very task dependent and both are amazing options in the price range, but latency wise, nothing feels like Mercury 2 at the moment.
Yeah the speed is super impressive.
https://chatjimmy.ai/ from Taalas seems down at the moment but if you really want speed.... 18,000 tps is something to experience
Did you get a chance to evaluate coding performance?
Yes, nothing to write home about. It's all relative of course, what stack, what goal, what approach on which models perform best, but for regular day-to-day coding, I do not find it usable given alternatives.
Kimi, Mimimax and GLM models provide far more robust coding assistance at sometimes no cost (financed via data sharing) or for very cheap. Output quality, tool calling reliability and task adherence tend to be far more reliable across all three over Mercury 2, so if you consider the time to get usable code including reviews, manual fixes, different prompting attempts, etc. end-to-end you'll be faster.
Only "coding" task I have found Mercury 2 to have a place for code generation is a browser desktop with simple generated applets. Think artefacts/canvas output but via a search field if the applet has been generated previously.
With other models, I need to hide the load behind a splash screen, but with Mercury 2 it is so fast that it can feel frictionless. The demo at this point is limited by the fact that venturing beyond a simple calculator or todo list, the output becomes unpredictable and I struggle to get Mercury 2 to rely on pre-made components, etc. to ensure consistent appearance and a11y.
Despite the benchmarks, cost and speed figure suggesting something different, I have had the best overall results with Haiku 4.5, simply because GPT-5.4-nano is still unwilling to play nice with my approach to UI components. I am currently experimenting with some routing, using different models for different complexity, then using loading spinners only for certain models, but even if that works reliably, any model that I cannot force to rely on UI components in a consistent manner isn't gonna work, so for the time being it'd just route between less expensive and more expensive Anthropic models.
Coding wise, one more exception can be in-line suggestions, though I have no way to fairly compare that because the tab models I know about (like Cursors) are not available via API, but Mercury 2 seems to perform solidly there, at least in Zed for a TS code base.
Basically, whether code or anything else, unless your task is truly latency dependent, I believe there are better options out there. If it is, Mercury 2 can enable some amazing things.
It's being explored right now for speculative decoding in the local-LLM space, which I think is quite interesting as a use-case
https://www.emergentmind.com/topics/dflash-block-diffusion-f...
DFlash immediately came to my mind.
There are several Mac implementations of it that show > 2x faster Qwen3.5 already.
I have. It requires a distinct intuition compared to a normal language model. Very well suited to certain problems.
Can you tell us more?
I've been playing with a Swift implementation of a diffusion language model (WeDLM), but performance is not yet acceptable and it still generates roughly from left-to-right like a language model (just within a sliding window rather than strictly token-by-token... but that doesn't matter when the sliding window is only like 16 tokens.)
3倍向上したとこのとですが、ボトルネックはMemory BandwidthからComputeに移行したの？ それともMemory Bandwidthが支配的ですか？
This translates to
> I understand it improved by 3x, but has the bottleneck shifted from Memory Bandwidth to Compute? Or is Memory Bandwidth still dominant?
But why did you post your comment in Japanese? We have so many good options for automated translation nowadays!
でも、なぜ日本語でコメントを投稿したんですか？最近は自動翻訳の良い選択肢がたくさんあるのに！
I'm not in on the joke, can someone ELI5
Perhaps there is none.
I'm not a native English speaker and every now and then I see a comment in my mother tongue (downvoted to all hell of course). It's usually some kind of offhand remark.
> 2025-04-12: Initial code release with training and inference support.
> 2025-04-12: Released I-DLM-8B, I-DLM-32B, and I-DLM-8B-LoRA on HuggingFace.
Is this old already? Not saying that's a bad thing, since it seems very sophisticated. Just curious if there's an update
It's clearly a typo on the year, April 12 was two days ago, a quick check in HuggingFace shows that they were uploaded 5 days ago.
Can diffusion models have reasoning steps where they generate a block, introspect and then generate another until the output is satisfactory?
Well, you can take the output of a first pass and pass it back through the model like AR “reasoning” models do at inference time.
Yes and has this been tried?
Yes, Mercury 2 is a reasoning model [0].
[0] https://docs.inceptionlabs.ai/get-started/models#mercury-2
So can you just use this and have a faster Qwen32b?
https://huggingface.co/yifanyu/I-DLM-32B/tree/main