I think I’m probably being dumb, but the gotcha here seems to be - ‘if I give an application permission to access a folder, it has access to the files in that folder’ - which is what I would expect??
Yes, you need to read more carefully. In particular:
“8. Confirm that Documents access for Insent is still disabled in Files & Folders.
“9. Whatever you do now, the app retains full access to Documents, no matter what is shown or set in Files & Folders.”
[…]
“Access restrictions shown in Privacy & Security settings, specifically those to protected locations in Files & Folders, aren’t an accurate or trustworthy reflection of those that are actually applied. It’s possible for an app to have unrestricted access to one or more protected folders while its listing in Files & Folders shows it being blocked from access, or for it to have no entry at all in that list.”
"6. Click on Open from folder and select your Documents folder there. Confirm that works as expected and displays the name and contents of one of the text files in Documents."
It's because in step 6 the user explicitly selected the Documents folder.
The app can access the Documents folder because the user chose that directory in the native file browse dialog during the same run of the app. IMO that's a reasonable trade-off.
The problem is that this given permission doesn’t show in Files & Folders, and after turning it on and off there it still persists. The only way to revoke it is using some CLI command and restart the computer.
That's not what's happening here.
Forget about the first 5 steps. If you install the app and start from step 6, the behaviour will be the same. If the user chooses the Documents folder in the browse window in an app, the app can use the contents of the Documents folder without the need for that permission in the Settings page.
The Privacy settings applies only to access to the Documents folder without the user interaction.
I think the issue here though is that the permission for access remains even after you're not using the open/save dialog and that's not obvious (or controllable from the UI) after the fact.
I think it's reasonable to expect that an application gets access to a file you access through open/save, but the fact that the access to the directory and all the items in that directory persists after that isn't necessarily expected. Especially given that the near equivalent workflow on iOS doesn't behave like this and that's what a lot of users would probably expect. On iOS an app can ask for access to your photos, which you can allow, or limit to specific photos or deny. If you allow access to specific photos and then the photo selector appears, even if you chose an album, the app will only get and retain access to the specific individual photos you gave it access to. It can not read the contents or even the names of any of the other photos in your library.
It seems pretty reasonable to expect that if the "Documents" folder permission is turned off for an app on macOS and you have given the application access to a specific document inside your documents folder, that the application would not also get (and retain) access to read from all the other folders and files within your documents folder.
I agree that this is the default behavior of most desktop OSes (including macOS), but it's also something that seems reasonable for Apple to change given how important sandboxing is to them in general, and how important it is in the broader context of always connected computers with multitudes of arbitrarily networked applications running.
The point is that (a) it’s misleading that the app has access to the folder while the settings claim that it doesn’t, and (b) there is no reasonable way for the user to revoke the implicitly given permission.
You don't need that permission if the user gives their implicit consent by selecting the Documents directory in the browse window. That's why most apps don't even show up in the Privacy Settings at all. Most apps don't need that, because they don't try to access that directory on their own. They only do it when the user selects the directory.
I guess the improvement can be to show the implicit consent in the privacy settings page as well, and have a way to revoke it.
Yeah, it's less of a "GOTCHA!" and more of a weird use case that Apple engineers probably didn't think through all the way. Doesn't seem like a difficult fix at all.
If the app opens a window and prompts the user to select a directory to save a file or load a file, should that access be recorded in the privacy settings page? I'd argue that maybe there should be a verbose version of the privacy settings page, where if you _really_ want to you can see every dir that every app has ever accessed, but the vast majority of users don't care.[0]
I'm less caffeinated this morning though so maybe I misread the whole argument.
[0] edit: And whether the app still has access to that dir. Which maybe that was the point of the article. I am just skeptical generally of these kinds of exposés because while they're generally pretty fair, they'll inevitably get picked up by the geniuses on r/pcmasterrace who will spin it into "Apple Privacy and Security Settings Let Terrorists Invade Your Family Photos"
The real problem with this isn't so much that it doesn't show the implicit consent. That would be nice but not a big deal. It's that it shows explicit non-consent that is getting ignored.
8. Confirm that Documents access for Insent is still disabled in Files & Folders.
Is this part true? The article's fix involves running a command and rebooting the computer. If restarting the app was sufficient, surely you wouldn't need the command/reboot?
I guess not. Looks like if you choose the Documents directory once, you give your implicit permission to the app until you choose another restricted directory.
This is so typical for Apple software "quality". While a truly love some of the features Apple has put into my pocket, I am noticing since years that at least iOS is the first commercially sold platform where I sometimes have to press a boolean toggle twice to have it take effect. They seem to have a lot of bugs around UI synchronisation.
That's not quite it either. It's more along the lines of "I revoked access via one mechanism, then granted it via a different mechanism, and the setting UI for the first mechanism doesn't reflect the second action".
There's no privilege escalation here, but there is a misleading privacy settings UI, which offers no obvious way to audit/revoke permissions in the second case
- it's non-obvious that the second mechanism (a file picker) is a permission granting mechanism.
- it's non-obvious that the second mechanism (a file picker) is a permission granting mechanism whose permission survives the action context that triggered the file picker (e.g "pick a folder to do action A" also magically imbues similarly gated actions B C D and Z with access to that folder, possibly non-interactively even).
- it's non-obvious that the second mechanism (a file picker) is a permission granting mechanism whose permission propagates to an action gated by the first mechanism, a first mechanism for which "Yes" means yes but "No" means "Maybe, depending on past unrelated actions that triggered an unrelated permission mechanism"
Not quite. The steps are revoking permission in the UI (which works as expected), then implicitly granting permission in a way that the UI does not reflect but quietly persists.
> In this Friday’s magic demonstration, I’m going to show how what you see in Privacy & Security settings can be misleading, when it tells you that an app doesn’t have access to a protected folder, but it really does.
One might expect macOS to recognize “you selected a folder that’s already got a UI associated with it” and to wire this up on the backend through the UI rather than creating a simple path exception that leaves the UI nonfunctional. I would have just filed a feedback report about it; but, the outrage-framing of that is, in historical context for this particular site, normal. They have posted extensively about Gatekeeper and TCC issues and seem to encounter them rather more reliably than others do, and released various tools (including today’s!) to support debugging, so certainly I empathize!
It’s really poorly written. After reading it all I still can’t figure out what’s the mechanism by which revoked permissions are hanging around, which is what would actually be interesting here.
That's the beauty of using a GUI-first operating system!
> only way you can protect your Documents folder from access by Insent is to run the following command in Terminal: tccutil reset All co.eclecticlight.Insent then restart your Mac
Jobs is turning in his grave. There are lots of stories of this conflict at NeXT and Mac OS X where there's a quick fix but not via GUI, which was one of the many things that incensed him.
I'm sure there are some great ones, but it was 5-10 years ago when I last read one, and it was fantastic. It's nearly impossible to do a web search for it right now, probably because of Google's bias towards recency. I know it's been linked on Hacker News many times, so maybe somebody else has better info here.
Even if you're not an Apple fan, these sorts of stories are kind of great for learning about product development and companies in general, I think. jwz's stories of Netscape are also phenomenal.
Speaking of GUI weirdness, I've seen a couple of relatively newer macbooks do this thing where the laptop is shutdown with wifi disabled, but after login on startup the wifi icon displays the wifi scanning mode as if the wifi is enabled and looking for networks before reverting to the wifi disabled display icon.
Is this a GUI bug or is the wifi disabled setting overrided for a split second on startup? I haven't looked into it, but the latter would be extremely concerning.
Eye-opening findings. After reading the article I revoked every folder permission and tested: Insent still reads Documents even when the UI shows "None". This is a serious trust failure; transparency is supposed to be the whole point of those preference panes.
This is exactly why the security model matters. If the OS or app can access your data, so can anyone who compromises it. The only real solution is client-side encryption where the server NEVER sees plaintext — your keys stay on your device.
We've been building something in this space — Cifer Security uses ML-KEM (post-quantum) for key encapsulation and Poseidon hashing, with Groth16 proofs for verifiability. The server is intentionally blind to what it's storing.
The macOS permission model is theater if the app itself isn't zero-knowledge. Privacy can't rely on UI toggles — it has to be cryptographic.
Another solution would be for people to make up their minds. Maybe it's time to give up entirely on multi-tasking support in the OS, because what's the point if all interoperability is going to be disabled "for security"? Might as well just go back to running one program at a time and close up all those security holes in one go.
Why everything has to be on the server? ok, Where are you going to store your client authentication tokens or decryption keys. A proper file system isolation is a key if you want a proper application sandboxing
There's another "security UI" issue in the latest macOS, that's been there for at least a few versions.
I go into "Privacy & Security", "Full Disk Access". A bunch of apps added themselves in there (Anki, Fission, Microsoft Autoupdate, WhatsApp), the toggle is disabled and I've never enabled it. Ok, whatever.
But when I go into "Files & Folders", and under those apps I see "Full Disk Access" in gray. Apps that have Full Disk Access toggled on look identical, with "Full Disk Access" in gray. What the hell am I supposed to make of that?
Is it a bug? Do they have full disk access? Is the UI trying to imply that those apps are solely controlled by the FullDisk toggle and are ineligible to request granular permissions for Desktop/Documents? Or that they are eligible, but haven't requested it? Or maybe they did request it, and I granted it, but I don't get to see it? Who knows?
The problem with Mac’s sandbox system is that it’s giving me some PTSD of Windows UAC. It’s inventing a solution to a problem that might exist in small doses, but instead gives users permission fatigue.
I personally think the traditional *nix model has served us quite well, and elective sandboxing using containers (à la Docker and so on) is quite good. The Mac sandbox model is probably ok for most normal users, but for power users is infuriating at times. Multiple restarts of Mac and various processes (and when you realize not enough scopes have been granted, another subsequent restart). I think Mac forcing all users into its sandbox system has been one of my least favorite impacts since upgrading macOS, leading to the enshittification of macOS.
The craziest thing is background processes started by Terminal/iTerm (such as tmux) can inherit Terminal or iTerm’s elevated status even when Terminal or iTerm are no longer running, dead, or killed. So you’ll have a bunch of elevated processes without the elevated parent or grandparent process running—it makes me feel the whole permissions scheme is more performative than actually useful.
I feel the opposite with Mac permissions (or Linux or Windows). Hardly anything asks me, and it seems like everything has access to everything. But same conclusion here, if I don't trust something, I want to explicitly sandbox it.
Note that this isn't "Mac's sandbox system", it's TCC. That's an important distinction to make, because apps that have opted into the proper App Sandbox can't do this... they don't even have the ability to display a prompt for direct access to Documents/.
With the App Sandbox, sandbox extensions are issues whenever you open a file using the file picker. They only last until the app is restarted.
A caveat is that you can save "Security Scoped bookmarks" (basically a signed base64 blob [1]) and pass that around to preserve access, but that isn't very common.
I feel like I can mostly use containers on macOS. Is there a different sense that people are using containers on *nix? Or are you referring to all the macOS specific software footguns?
I would like to be able to run arbitrary code with gradual/granular privilege escalation. (e.g iOS/android with more affordances and escape hatches. macOS is getting there, but it's been a pretty bumpy/potholed road). Right now if I download a random github repo, I'd put it in a docker container and give it ports/volumes/etc.
I was building a lightweight imitation of OpenClaw. Just a Claude.md and iMessage watcher. I had to play around with Privacy a lot to be able to read my iMessages database, and do a lot of iTerm restarting.
I remember it being worse a while ago. But most of the time I can drag a binary into Settings->Privacy & Security->Full Disk Access or other things (Accessibility API). Maybe other issues come up.
I feel like it should still be much easier, but the general sandboxing model seems directionally functional. (My understanding is containerization isn't a silver bullet security-wise, still requires fiddling, and would be a resource hog ram-wise if not CPU?)
I wish I could pick a parent folder/file and get a box to control everything (network/disk/folders/peripherals/accessibility).
One of the worst cases happens immediately after logging into a fresh Mac, or after upgrading one. You’re instantly hit with a barrage of requests from all the installed apps and their various permissions. It makes for such a terrible initial user experience, it’s utterly baffling someone at Apple has signed it off. They used to poke fun at Windows in their ads, but UAC has never been that terrible in my experience.
The first thing I wondered after reading this article is whether there might be a scheduled task to run the permission reset similarly to how the author ran it via the command line.
It seems most likely that this is some kind of bug where that command or its underlying actions should be called every time the user unchecks something in the settings panel.
This is what we get when the iPhone’s permission system is grafted on top of a desktop OS that was never designed for it. I think they could have done something that is more Unix-like and yet friendly to the GUI end user.
It seems that author basically found a 0day and published it. It's for sure better than selling it on the dark web but maybe it's better first tell it to Apple?
Apple Security would instantly close it as "don't see the problem here" if you reported it to them. They have a poor reputation around TCC bug reports.
Not exactly. It's not a "new" attack vector, any software which was malicious would have already been able to attack when you first gave it permission (a prerequisite for this sticky permission issue). If you had downloaded an app and discovered it was malicious the remedy would generally be to uninstall the app, not just "revoke the permission for the one folder".
It's not a good look for Apple, and it's not great that the permission revocation basically doesn't actually work, but any malware that could have infected the system due to this issue would have also been able to infect the system while the permission was still (intentionally) enabled.
Not really, just an unintuitive security feature. You still need the user's permission to access that folder, but that permission is then persistent. I consider it a UX bug for sure but not an exploit.
I agree, it's a ui/ux problem. It would seem that using the open file dialog should also request access but I'm guessing that was too intrusive and the user action is seen as implicit authorization. Security is one of those things that should aways be explicit though.
imo, you can't really ever fully trust a closed-source system, which is why I advocate for linux distros, even though I'm a mac user myself (for now)
VPN should be properly implemented though as you're able to verify network requests on your own and don't necessarily have to trust apple. Best guarantee is to have a VPN at router level that can't be circumvented by anything (+ a trusted router vendor)
This is a few years old, but at one point Apple was happy to bypass VPN or firewall settings to allow their own apps to communicate[1]. I don't know if this is still true on Tahoe, but I wouldn't be surprised if at least the mechanism still exists. So "they run fine", but they may not do what you expect them to do when it comes to Apple's products/services.
I think it is an acceptable quirk for a permission system that has been retrofitted on top of an ecosystem which was not designed with that threat model in mind.
But sure, if I was assigned to make an all-purpose desktop operating system today from scratch, I would likely do this differently, but along with a bunch of other things I think (and the app would have to be implemented differently too).
I was considering buying a mini Mac, but there wasn't a way to encrypt it fully with Veracrypt and in the case of Francis Rawls the feds got pass Apples vault encryption. With the recent iPhone notification storage revelation I don't trust Apple at all.
I never used the ~/Documents folder. Lots of apps just trashed their stuff in there over the years making that folder entirely unusable for my actual document files. I would have to dig through the mess to find them. So I have to admit that I don't really understand the extra "care" Apple is doing to this particular folder. Same for the ~/Downloads folder: all my actual downloads go to some other disk, since the system disk is so small. Protecting this two folders would be entirely useless here.
IMHO where it really needs to be protected from when iCloud suddenly starts grabbing everything w/o the user's permission to upload it to some random Apple servers.
I think I’m probably being dumb, but the gotcha here seems to be - ‘if I give an application permission to access a folder, it has access to the files in that folder’ - which is what I would expect??
Yes, you need to read more carefully. In particular:
“8. Confirm that Documents access for Insent is still disabled in Files & Folders.
“9. Whatever you do now, the app retains full access to Documents, no matter what is shown or set in Files & Folders.”
[…]
“Access restrictions shown in Privacy & Security settings, specifically those to protected locations in Files & Folders, aren’t an accurate or trustworthy reflection of those that are actually applied. It’s possible for an app to have unrestricted access to one or more protected folders while its listing in Files & Folders shows it being blocked from access, or for it to have no entry at all in that list.”
"6. Click on Open from folder and select your Documents folder there. Confirm that works as expected and displays the name and contents of one of the text files in Documents."
It's because in step 6 the user explicitly selected the Documents folder.
The app can access the Documents folder because the user chose that directory in the native file browse dialog during the same run of the app. IMO that's a reasonable trade-off.
The problem is that this given permission doesn’t show in Files & Folders, and after turning it on and off there it still persists. The only way to revoke it is using some CLI command and restart the computer.
That's not what's happening here. Forget about the first 5 steps. If you install the app and start from step 6, the behaviour will be the same. If the user chooses the Documents folder in the browse window in an app, the app can use the contents of the Documents folder without the need for that permission in the Settings page.
The Privacy settings applies only to access to the Documents folder without the user interaction.
I think the issue here though is that the permission for access remains even after you're not using the open/save dialog and that's not obvious (or controllable from the UI) after the fact.
I think it's reasonable to expect that an application gets access to a file you access through open/save, but the fact that the access to the directory and all the items in that directory persists after that isn't necessarily expected. Especially given that the near equivalent workflow on iOS doesn't behave like this and that's what a lot of users would probably expect. On iOS an app can ask for access to your photos, which you can allow, or limit to specific photos or deny. If you allow access to specific photos and then the photo selector appears, even if you chose an album, the app will only get and retain access to the specific individual photos you gave it access to. It can not read the contents or even the names of any of the other photos in your library.
It seems pretty reasonable to expect that if the "Documents" folder permission is turned off for an app on macOS and you have given the application access to a specific document inside your documents folder, that the application would not also get (and retain) access to read from all the other folders and files within your documents folder.
I agree that this is the default behavior of most desktop OSes (including macOS), but it's also something that seems reasonable for Apple to change given how important sandboxing is to them in general, and how important it is in the broader context of always connected computers with multitudes of arbitrarily networked applications running.
The point is that (a) it’s misleading that the app has access to the folder while the settings claim that it doesn’t, and (b) there is no reasonable way for the user to revoke the implicitly given permission.
You don't need that permission if the user gives their implicit consent by selecting the Documents directory in the browse window. That's why most apps don't even show up in the Privacy Settings at all. Most apps don't need that, because they don't try to access that directory on their own. They only do it when the user selects the directory.
I guess the improvement can be to show the implicit consent in the privacy settings page as well, and have a way to revoke it.
Yeah, it's less of a "GOTCHA!" and more of a weird use case that Apple engineers probably didn't think through all the way. Doesn't seem like a difficult fix at all.
If the app opens a window and prompts the user to select a directory to save a file or load a file, should that access be recorded in the privacy settings page? I'd argue that maybe there should be a verbose version of the privacy settings page, where if you _really_ want to you can see every dir that every app has ever accessed, but the vast majority of users don't care.[0]
I'm less caffeinated this morning though so maybe I misread the whole argument.
[0] edit: And whether the app still has access to that dir. Which maybe that was the point of the article. I am just skeptical generally of these kinds of exposés because while they're generally pretty fair, they'll inevitably get picked up by the geniuses on r/pcmasterrace who will spin it into "Apple Privacy and Security Settings Let Terrorists Invade Your Family Photos"
The real problem with this isn't so much that it doesn't show the implicit consent. That would be nice but not a big deal. It's that it shows explicit non-consent that is getting ignored.
Other comment seems accurate
> during the same run of the app
Is this part true? The article's fix involves running a command and rebooting the computer. If restarting the app was sufficient, surely you wouldn't need the command/reboot?
I guess not. Looks like if you choose the Documents directory once, you give your implicit permission to the app until you choose another restricted directory.
Screen time is swiss cheese as well, not surprised.
This is so typical for Apple software "quality". While a truly love some of the features Apple has put into my pocket, I am noticing since years that at least iOS is the first commercially sold platform where I sometimes have to press a boolean toggle twice to have it take effect. They seem to have a lot of bugs around UI synchronisation.
The gotcha is “I gave it permission, then revoked permission in the UI, but it still has permission.”
That's not quite it either. It's more along the lines of "I revoked access via one mechanism, then granted it via a different mechanism, and the setting UI for the first mechanism doesn't reflect the second action".
There's no privilege escalation here, but there is a misleading privacy settings UI, which offers no obvious way to audit/revoke permissions in the second case
I think the issue is more like:
- it's non-obvious that the second mechanism (a file picker) is a permission granting mechanism.
- it's non-obvious that the second mechanism (a file picker) is a permission granting mechanism whose permission survives the action context that triggered the file picker (e.g "pick a folder to do action A" also magically imbues similarly gated actions B C D and Z with access to that folder, possibly non-interactively even).
- it's non-obvious that the second mechanism (a file picker) is a permission granting mechanism whose permission propagates to an action gated by the first mechanism, a first mechanism for which "Yes" means yes but "No" means "Maybe, depending on past unrelated actions that triggered an unrelated permission mechanism"
Not quite. The steps are revoking permission in the UI (which works as expected), then implicitly granting permission in a way that the UI does not reflect but quietly persists.
TFA intro (emphasis mine):
> In this Friday’s magic demonstration, I’m going to show how what you see in Privacy & Security settings can be misleading, when it tells you that an app doesn’t have access to a protected folder, but it really does.
One might expect macOS to recognize “you selected a folder that’s already got a UI associated with it” and to wire this up on the backend through the UI rather than creating a simple path exception that leaves the UI nonfunctional. I would have just filed a feedback report about it; but, the outrage-framing of that is, in historical context for this particular site, normal. They have posted extensively about Gatekeeper and TCC issues and seem to encounter them rather more reliably than others do, and released various tools (including today’s!) to support debugging, so certainly I empathize!
It’s really poorly written. After reading it all I still can’t figure out what’s the mechanism by which revoked permissions are hanging around, which is what would actually be interesting here.
That's the beauty of using a GUI-first operating system!
> only way you can protect your Documents folder from access by Insent is to run the following command in Terminal: tccutil reset All co.eclecticlight.Insent then restart your Mac
Jobs is turning in his grave. There are lots of stories of this conflict at NeXT and Mac OS X where there's a quick fix but not via GUI, which was one of the many things that incensed him.
Is there a common source/collection of such stories?
I'm sure there are some great ones, but it was 5-10 years ago when I last read one, and it was fantastic. It's nearly impossible to do a web search for it right now, probably because of Google's bias towards recency. I know it's been linked on Hacker News many times, so maybe somebody else has better info here.
Even if you're not an Apple fan, these sorts of stories are kind of great for learning about product development and companies in general, I think. jwz's stories of Netscape are also phenomenal.
Speaking of GUI weirdness, I've seen a couple of relatively newer macbooks do this thing where the laptop is shutdown with wifi disabled, but after login on startup the wifi icon displays the wifi scanning mode as if the wifi is enabled and looking for networks before reverting to the wifi disabled display icon.
Is this a GUI bug or is the wifi disabled setting overrided for a split second on startup? I haven't looked into it, but the latter would be extremely concerning.
[delayed]
Eye-opening findings. After reading the article I revoked every folder permission and tested: Insent still reads Documents even when the UI shows "None". This is a serious trust failure; transparency is supposed to be the whole point of those preference panes.
This is exactly why the security model matters. If the OS or app can access your data, so can anyone who compromises it. The only real solution is client-side encryption where the server NEVER sees plaintext — your keys stay on your device.
We've been building something in this space — Cifer Security uses ML-KEM (post-quantum) for key encapsulation and Poseidon hashing, with Groth16 proofs for verifiability. The server is intentionally blind to what it's storing.
The macOS permission model is theater if the app itself isn't zero-knowledge. Privacy can't rely on UI toggles — it has to be cryptographic.
Another solution would be for people to make up their minds. Maybe it's time to give up entirely on multi-tasking support in the OS, because what's the point if all interoperability is going to be disabled "for security"? Might as well just go back to running one program at a time and close up all those security holes in one go.
Why everything has to be on the server? ok, Where are you going to store your client authentication tokens or decryption keys. A proper file system isolation is a key if you want a proper application sandboxing
There's another "security UI" issue in the latest macOS, that's been there for at least a few versions.
I go into "Privacy & Security", "Full Disk Access". A bunch of apps added themselves in there (Anki, Fission, Microsoft Autoupdate, WhatsApp), the toggle is disabled and I've never enabled it. Ok, whatever.
But when I go into "Files & Folders", and under those apps I see "Full Disk Access" in gray. Apps that have Full Disk Access toggled on look identical, with "Full Disk Access" in gray. What the hell am I supposed to make of that?
Is it a bug? Do they have full disk access? Is the UI trying to imply that those apps are solely controlled by the FullDisk toggle and are ineligible to request granular permissions for Desktop/Documents? Or that they are eligible, but haven't requested it? Or maybe they did request it, and I granted it, but I don't get to see it? Who knows?
The problem with Mac’s sandbox system is that it’s giving me some PTSD of Windows UAC. It’s inventing a solution to a problem that might exist in small doses, but instead gives users permission fatigue.
I personally think the traditional *nix model has served us quite well, and elective sandboxing using containers (à la Docker and so on) is quite good. The Mac sandbox model is probably ok for most normal users, but for power users is infuriating at times. Multiple restarts of Mac and various processes (and when you realize not enough scopes have been granted, another subsequent restart). I think Mac forcing all users into its sandbox system has been one of my least favorite impacts since upgrading macOS, leading to the enshittification of macOS.
The craziest thing is background processes started by Terminal/iTerm (such as tmux) can inherit Terminal or iTerm’s elevated status even when Terminal or iTerm are no longer running, dead, or killed. So you’ll have a bunch of elevated processes without the elevated parent or grandparent process running—it makes me feel the whole permissions scheme is more performative than actually useful.
I feel the opposite with Mac permissions (or Linux or Windows). Hardly anything asks me, and it seems like everything has access to everything. But same conclusion here, if I don't trust something, I want to explicitly sandbox it.
Someone at Apple should watch some of their old ads.
https://www.youtube.com/watch?v=8CwoluNRSSc
Note that this isn't "Mac's sandbox system", it's TCC. That's an important distinction to make, because apps that have opted into the proper App Sandbox can't do this... they don't even have the ability to display a prompt for direct access to Documents/.
With the App Sandbox, sandbox extensions are issues whenever you open a file using the file picker. They only last until the app is restarted.
A caveat is that you can save "Security Scoped bookmarks" (basically a signed base64 blob [1]) and pass that around to preserve access, but that isn't very common.
[1] https://www.mothersruin.com/software/Archaeology/reverse/boo...
Yes, TCC is what I meant, but my understanding is TCC is a platform wide sandboxing system?
TCC is a leaky shoot at limiting non-sandboxed apps permissions. The actual macOS sandbox is a different thing.
I would say that TCC is working as intended, unfortunately, with many obscure behaviors to avoid breaking existing apps.
It's even more unfortunate that a lot of apps that could be easily sandboxed aren't.
I feel like I can mostly use containers on macOS. Is there a different sense that people are using containers on *nix? Or are you referring to all the macOS specific software footguns?
I would like to be able to run arbitrary code with gradual/granular privilege escalation. (e.g iOS/android with more affordances and escape hatches. macOS is getting there, but it's been a pretty bumpy/potholed road). Right now if I download a random github repo, I'd put it in a docker container and give it ports/volumes/etc.
I was building a lightweight imitation of OpenClaw. Just a Claude.md and iMessage watcher. I had to play around with Privacy a lot to be able to read my iMessages database, and do a lot of iTerm restarting.
I remember it being worse a while ago. But most of the time I can drag a binary into Settings->Privacy & Security->Full Disk Access or other things (Accessibility API). Maybe other issues come up.
I feel like it should still be much easier, but the general sandboxing model seems directionally functional. (My understanding is containerization isn't a silver bullet security-wise, still requires fiddling, and would be a resource hog ram-wise if not CPU?)
I wish I could pick a parent folder/file and get a box to control everything (network/disk/folders/peripherals/accessibility).
TCC is a different thing. Sandboxed apps work differently and won't need those TCC dialogs.
Plus, Apple exempt their own apps from a bunch of these permissions (because it would be an unacceptable user experience for their customers)
One of the worst cases happens immediately after logging into a fresh Mac, or after upgrading one. You’re instantly hit with a barrage of requests from all the installed apps and their various permissions. It makes for such a terrible initial user experience, it’s utterly baffling someone at Apple has signed it off. They used to poke fun at Windows in their ads, but UAC has never been that terrible in my experience.
Very much agree. In fact I don't remember Vista or UAC being as unreliable as the Mac now is.
The first thing I wondered after reading this article is whether there might be a scheduled task to run the permission reset similarly to how the author ran it via the command line.
It seems most likely that this is some kind of bug where that command or its underlying actions should be called every time the user unchecks something in the settings panel.
This is what we get when the iPhone’s permission system is grafted on top of a desktop OS that was never designed for it. I think they could have done something that is more Unix-like and yet friendly to the GUI end user.
This reminds me of the early days of MacOS where "repair permissions" was the magic fix to everything, or so it was rumored.
Whoa you are bringing back some memories.
And it absolutely was a magic fix. I stand by it.
I never trust american and Chinese companies
It seems that author basically found a 0day and published it. It's for sure better than selling it on the dark web but maybe it's better first tell it to Apple?
Apple Security would instantly close it as "don't see the problem here" if you reported it to them. They have a poor reputation around TCC bug reports.
Not exactly. It's not a "new" attack vector, any software which was malicious would have already been able to attack when you first gave it permission (a prerequisite for this sticky permission issue). If you had downloaded an app and discovered it was malicious the remedy would generally be to uninstall the app, not just "revoke the permission for the one folder".
It's not a good look for Apple, and it's not great that the permission revocation basically doesn't actually work, but any malware that could have infected the system due to this issue would have also been able to infect the system while the permission was still (intentionally) enabled.
Not really, just an unintuitive security feature. You still need the user's permission to access that folder, but that permission is then persistent. I consider it a UX bug for sure but not an exploit.
I agree, it's a ui/ux problem. It would seem that using the open file dialog should also request access but I'm guessing that was too intrusive and the user action is seen as implicit authorization. Security is one of those things that should aways be explicit though.
can you trust vpn to run well on a mac tho. like mullvad or something good.
imo, you can't really ever fully trust a closed-source system, which is why I advocate for linux distros, even though I'm a mac user myself (for now)
VPN should be properly implemented though as you're able to verify network requests on your own and don't necessarily have to trust apple. Best guarantee is to have a VPN at router level that can't be circumvented by anything (+ a trusted router vendor)
Yeah, they run fine.
This is a few years old, but at one point Apple was happy to bypass VPN or firewall settings to allow their own apps to communicate[1]. I don't know if this is still true on Tahoe, but I wouldn't be surprised if at least the mechanism still exists. So "they run fine", but they may not do what you expect them to do when it comes to Apple's products/services.
[1] https://www.macworld.com/article/675671/apples-own-programs-...
Great insight! Thanks for sharing.
> Once you have downloaded Insent
As if that's going to happen.
I think it is an acceptable quirk for a permission system that has been retrofitted on top of an ecosystem which was not designed with that threat model in mind.
But sure, if I was assigned to make an all-purpose desktop operating system today from scratch, I would likely do this differently, but along with a bunch of other things I think (and the app would have to be implemented differently too).
I was considering buying a mini Mac, but there wasn't a way to encrypt it fully with Veracrypt and in the case of Francis Rawls the feds got pass Apples vault encryption. With the recent iPhone notification storage revelation I don't trust Apple at all.
I couldn’t find any reference to File Vault being cracked in the Rawls case. Source?
Edit: I saw they accessed his Mac but they had his password. File Vault 2 wasn’t bypassed, and afaik has never been cracked.
Why crack it when you have silicon level backdoors?
In T2? Source?
Notification storage? What’s the story there?
Nevermind just saw this: https://news.ycombinator.com/item?id=47716490
I never used the ~/Documents folder. Lots of apps just trashed their stuff in there over the years making that folder entirely unusable for my actual document files. I would have to dig through the mess to find them. So I have to admit that I don't really understand the extra "care" Apple is doing to this particular folder. Same for the ~/Downloads folder: all my actual downloads go to some other disk, since the system disk is so small. Protecting this two folders would be entirely useless here.
IMHO where it really needs to be protected from when iCloud suddenly starts grabbing everything w/o the user's permission to upload it to some random Apple servers.