I switched over to Nix about a year ago. I was a Windows user before that for 30 years and tried Linux a couple of times, but it never stuck. Now I know I will never touch Windows again. With NixOS I've finally found a system that actually works for me — and the full OS configuration is in a repo. My god, I love it so much.
Sometimes I even prefer nix-shells over uv for quick one-off Python scripts.
I cannot sufficiently convey how absolutely barbaric everything else feels in comparison. Not having Nix would be like having to work on code without Git — absolutely unacceptable.
And it really isn't that much work — you do it once. The next time you set up a new system, without Nix, you'll have to do the full configuration all over again.
Have you heard of any good projects for running isolated containers in NixOS that are cheaply derived from your own NixOS config? Because that is what I want. I want a computer where I can basically install every non stock app in its own little world, where it thinks "huh, that is interesting, I seem to be the only app installed on this system".
Basically, I want to be able to run completely unverified code off of the internet on my local machine, and know that the worst thing it can possibly due is trash its own container.
I feel like NixOS, is one path toward getting to that future.
If containers are safe enough for ur use case then just use nixos containers they just a few more lines to setup in a regular nixos config
If it isn't enough
there's microvm.nix which is pretty much the same in difficulty /complexity, but runs inside a very slim and lightweight VM with stronger isolation than a container
depends whether you consider rootless Docker "cheap". I tried running ZeroClaw in a Nix-derived Docker (spoiler - it was a bad idea to use ZeroClaw at all since the harness is very buggy) and there is still a potential for container escape zero-days, but that's the best I've found. also, Nix's own containerization is not as hermetic as Docker; they warn about that in docs
It doesn't help that there are two NixOS wikis. nixos.wiki and wiki.nixos.org.
wiki.nixos.org claims that nixos.wiki is outdated and unofficial. But both appear to receive updates, and which one wins the SEO game is a coinflip whenever i google a nixos question.
Claude Code has to be actively steered, because while it knows some nixpkgs it surely doesn’t know it enough. E.g. it was absolutely incapable of fixing lldap settings after system upgrade from 25.05 to 25.11. It just prodded around blindly, producing meaningless configs instead learning how the module works.
NixOS docs work for me, but I tend to just go for the nixpkgs source instead. Manuals document options but not how those are actually plumbed through, nor what remains behind the scenes like all systemd unit settings). Claude can do this too, but it goes quite weird roundabout ways with a lot of weird `find /nix/store` and `nix eval`s to get to it, slow and token-hungry (and not always accurate).
This said, Claude is very helpful at checking logs and providing a picture of what’s going on - saves ton of time this way. Plus it can speed up iterating on changes after it’s fed enough knowledge (but don’t expect it to do things right, that’s still on you). It has breadth of it, but not the depth, and that shows at almost any non-trivial task.
You don't have Claude Code git clone nixpkgs and home-manager for local reference?
I feel you on the nix store + nix eval death loop, though it gleans real info. If I weren't on the Claude Max plan I'd probably feel more of the pain. And context is now 1MM tokens which means you're not running out just as it's starting to piece things together, heh.
I do, but it somehow tends to forget how to do things right now and then - despite having notes in memories system - and starts to do them in its own weird ways.
I’m going to experiment with skills next, or maybe make it build a few helper scripts for itself to quickly get some module source from nixpkgs matching flake.lock without having to think of it all. I’m positive about Claude for nix management, merely saying it’s not something that “just works” for now and reading nix code is still on the human part of the tandem.
This said, to be fair - when it gets the approach right, it excels. I was setting up Ente for photos backup and sharing, and it produced a nice overlay with custom patches for my needs from just “figure out why /shared-albums/ redirects wrong and fix”. Found the module, the package, pulled source, analyzed it, proposed a patch (settings weren’t enough), did it - I only had to test, and only because I haven’t provided it with a browser. Felt amazing.
I would have never become a power user of Linux were I used LLM to do the installation of Gentoo once upon a time. :( So do you guys not know much about the distro you are using, or how does this work? I honestly thought your comment was sarcasm, but apparently it is not.
The things to know about the OS are high level things. The rest of its idiosyncrasies you learn just in time through daily exposure like anything else.
Nothing about this changes with Nix nor AI agents.
You can read documentation on an as-needed basis or to your heart's content.
Though I don't like relying on documentation since it's error prone and goes stale. If it's something I care about, I have an AI agent git clone, read the source, and summarize it for me.
Kind of an interesting thing here where if this is how you view it, it kind shows in itself why you don't actually need it.
Like what is ultimately the difference here for you vs a non-nix user who, as author says, is just dealing with some big ambiguous pile of state? It kind of takes away any upside to using nix, and probably just creates more friction for your AI than just running ubuntu/apt stuff.
The idea is you can keep configuration "in your head" such that you can reason and iterate and fully know what your system is like at any moment. If you actually don't care about that, you aren't getting anything out of it!
Nix in CI seems like a really excellent match. I don’t care much about the ATproto space - but Tangled has built their CI system on Nix and I find that really compelling. CI Caching is just awful with GitHub actions - so it made me disappointed that Forgejo went that route.
After having done the switch to nixOS, I can confidently say that managing a system any other way (like with apt/brew + 20 handwritten bash scripts) really is neanderthal technology and nix is superior in every single way.
It's also great for the AI era, copilot is really good with that stuff.
Although I’ve never committed to using nix system-wide, I do enjoy nix-based using https://devenv.sh/ for the very reasons described in the article. It’s much easier than local containers for development.
I've never really understood how version pinning is meant to work with devenv.sh or Nix more generally. If I whack a .tool-versions file in my repo, everyone who works on it can use install the exact same versions of the relevant tools using asdf. That's low tech and imperfect (and certainly not a replacement for all of Nix's features), but it works as far as it goes. None of the examples on the devenv.sh page demonstrate pinning of tools/packages to specific versions.
As best I can tell, Nix enthusiasts think that this is an XY problem and that I shouldn't want to pin individual tools/packages to arbitrary versions. But the thing is that I am a rude barbarian who very much does want to do this, however philosophically misguided it might be.
If you use the flake system (which is technically still experimental, but everyone is already using it anyway), all your flake 'inputs' are automatically pinned in a flake.lock file that can be committed to git for reproducibility. So if you add nixpkgs as a flake input, your nix expressions will always be referring to the same exact package versions until you update the lock file.
The downside is that flake inputs refer to other flakes, not individual packages, so if you update the nixpkgs input it will upgrade all of your packages at once. For some packages such as Python, nixpkgs tracks multiple major versions so you can loosely pin to that version. You can also include nixpkgs as an input multiple times under different git tags/commits and only use that input for some of your packages to effectively pin them. You could keep using one nixpkgs but override the package's source to build it for a specific version/commit, but this setup could break in the future, because the derivation (and therefore build instructions) will keep evolving while your package's version will not. Or, if you really wanted to, you could straight up just copy the derivation from nixpkgs into your local repository and use that instead.
Nix is quite flexible so there's more options than just these, it just takes a little getting used to to find out what's possible. I don't use devenv myself, but some quick googling reveals it works just fine with flakes, so I would try that to see if it suits your needs.
I tried NixOS and failed miserably. I've pointed at to the Fedora Atomic distros, which are also immutable, and apparently incomparably easier to setup.
I'm tempted to give it a shot, with the extra bonus that I've never dabbed with a fedora-based distro.
I tried fedora silverblue for a while, but the way it works is that it builds a new root fs image whenever you change the installed packages, this makes system package changes take comparatively long vs a traditional os. They suggest installing most apps via flatpak, which is okay as long as you can deal with flatpak idiosyncrasies.
I also tried fedora coreos for a vm + container host, but found the recommended method to configure the system with ignition files and one shot systemd units to be too involved for making a one off system, and it’s probably better for a cloud deployment with many identical nodes.
I don’t any experience with Nix - but how does it handle software which runs its own updating processes outside the package manager? Specifically thinking about software like Discord, Slack, Docker Desktop, Jetbrains Toolbox, etc.
Is the Nix-ism to just reject using such software?
So Discord, and quite a lot of software like this has actually two layers of updates. There's updates of the web page (which is basically writing a bunch of JS to the home directory) which NixOS does nothing to prevent, and then there's updates of the host program (i.e. Electron) which NixOS disables.
Jetbrains Toolbox is in a sort of different category with tools like Rustup, since it's a package manager of its own. If you manage your IDEs with Toolbox, then your IDE versions are "outside Nix" and not managed by Nix. It's just packaged into its own pretend FHS environment and then doesn't know anything about it being on Nix. That said, updates of Toolbox itself will need to happen through your package manager.
As a last comment, why run Docker Desktop on Linux at all? Like I understand on Windows and Mac - docker is inherently tied to Linux so the Windows/Mac apps abstract away the fact that it's running a VM and doing a bunch of port mapping and filesystem mounting under the hood so you can pretend it's not running on a VM, but on Linux I've always just installed docker straight onto the host.
There’s more to Docker Desktop than just “oh it’s just docker underneath”
1. Unified experience across Windows, Mac, Linux
2. The security posture is much stronger by default. Many people, who would probably be considered the “target audience” for Docker Desktop, don’t bother to make docker-ce rootless, or don’t use podman, so running it in a VM is better, though admittedly often annoying.
3. Not everybody is a CLI warrior. Docker Desktop gives a decent GUI, ways to monitor and control containers visually, and even deploy kubernetes with a single click.
Regarding Docker Desktop on Linux - yeah definitely not strictly necessary. Sometimes it’s just convenient to have a UI instead of fumbling around trying to remember some cli incantation to check for dangling volumes or what-have-you. I think ideally I want to move to Podman anyways - but I’m using pop_os as my dev distro at the moment and am stuck on an older version which doesn’t have their native `podman compose` implementation yet
Except if you go look at nixpkgs half of the technologies grandparent listed are either missing entirely or in a hilariously broken state.
The true answer is that there is just some software that is antithetical to the philosophy of nix. It’s not necessarily nix’s fault that this is the case, but their purism towards resisting opaque binary blobs going into the store reflects on the actual state of what’s available in nix.
You need some impure, nonreproducible way of managing that software. So on nix Darwin I let these opaque binary blobs manage themselves via homebrew and use nix for every other case possible
That's not much different than other distros, because the way auto-update usually works, is it can't use root permissions or the system package manager (in any distro), so it has to install the newer version in $HOME. Once the update is installed, the system package becomes a trampoline to that.
I tried Discord, and this one seems to download some updates on first run, but the version sticks to the one from the system (0.0.127, latest is 0.0.129). So I assume it just doesn't update, or it tries to and fails.
For a personal desktop environment, I just install them normally when there's no up to date nixified option.
For some things I've vibe-coded a nix module on github that uses a scheduled github action to check for underlying app updates and then it generates a new hash and tags a release.
I've done that for claude code and cursor, which is also an opportunity to let me manage their config files from my nix config.
I run NixOS and the number of times ive been able to install something 'normally' (not via nixpkgs/flake) is approximately zero. You cant go to a website and download a binary and just run it. Almost every program references a shared library and wont be able to find it.
Nixpkgs is very complete in my experience, and in the instances where its not, someone usually has made a flake. The only times ive had to custom-make a flake were extremely new programs, or extremely old ones. Often the newer programs had PRs waiting on nixpkgs anyway, and were only a few days away from building properly in nixos-unstable.
They said Nix, so I was thinking about macOS + nix-darwin when I wrote that.
You're right. When I tried using NixOS as my main desktop experience for a few months, I ended up with a custom derivation for various apps I used. That's probably why I made the claude code and cursor modules in the first place.
But I'm also remembering I made my own keepassxc module because keepassxc wants to be able to write to its config file, but I also want to configure it from nix, so I had to make my module use an activation-time script to merge nix config into the keepassxc config file.
I lost interest in NixOS for day to day personal computing, though vibe-coding modules like that wasn't as big of a dealbreaker as there being almost zero laptops that compete with a Macbook.
The other pain is Linux desktop environment stuff in general like dealing with interactions between a Steam game, wayland, and wayland-satellite. Though NixOS helped there since it was easy for an AI agent to investigate the issue, inspect the nix config, and make a targeted, commented patch that shows up in git.
right now I have bought into the Nix koolaid a bit.
I have NixOS Linux machines and then nix-darwin on my Mac.
I use Nix to install Brew and then Brew to manage casks for things like Chrome what I'm sure updates itself. So the "flake.lock" probably isn't super accurate for the apps you described.
nix & nixos are by far the worst way to manage system configuration, except for any other way that's been tried. imagine if there was something with declarative system configuration _not_ written in an insane undebuggable recursive nightmare of a language/stdlib? oh well, I'll keep using it, because what other options are there?
+1, Guix is quite good with some tricks up it's sleeve compared to Nix.
I am not a fan of S-expressions but using scheme is more reasonable than nix+bash to me.
On the negative side, guix can be slow. It is also not a very pragmatic os. NixOS does non-free firmware and drivers without issue. You need to jump through some hoops for this with Guix. This is not an issue if you plan to run guix in a VM though.
I mean it's pretty wild to take s-expressions and not call them extremely terrible to read. The nix language sucks really badly, but I gladly take it over writing S-expressions.
It reads almost the exact same as any functional C-style language. Not to mention that specifically for Guix, you're going to be writing the (name value) form for 99% of it.
I love Nixos. Having a deterministic system is such a great way to know what your system is capable of. The only thing that bothers me is that when I rebuild my system after updating the lock file, if a package is broken the whole upgrade become impossible.
This is niche and HN is full of these back and forth comments. One thing which a particular type of crowd will appreciate is being able to apply simple patches to constantly-up-to-date packages.
For an example, I love atuin but it, by default, skips commands starting with space. Currently it's not configurable and while I wait for time to submit a PR or for the issue to be resolved, make a single line `patch` which just removes the part of the `if` statement which checks if it starts with space. So easy, took 5 minutes (also had to comment out 1 test).
And now on home-manager debian or nixos server, I get up to date atuin with that one patch. It downloads rust, etc, compiles, and then that's garbage collected away
Same but with kernel. What lead me to nixos: company gave me a laptop with iGPU that wasn't supported by any released linux kernel. There were patches waiting to be merged, with nixOS making an installer image that supports my machine was simple.
The idea is so good it’s as close to platonic as it gets. The user experience of writing your own nix expressions is so bad that it makes me angry every time I try. Not only that, but at some point the beginner help (!) meta became »use flakes, don’t do what the existing tutorials tell you, yes flakes are unstable beta and there are no tutorials but use it I beg you«. No, please, let me choose my own way to learn!
I haven’t given it a shot in the LLM age yet though, and trying out NixOS in a VM is not only easy, it is practical – in the sense that when you’re happy, you can simply boot that same config/OS anywhere else by just installing that config. And I’ll never forget that one time where I completely borked my everything in the VM, did a kernel rollback with like 3 command line args and a reboot, and the OS was, well, rolled back. As I said, almost platonic.
What I can recommend is using nix-the-package-manager. Whenever I need the newest version of something, `nix-env -i <whatever>` and it’s there and works. If it doesn’t, roll back. If I need a different version, that’s on nixpkgs as well, with the same negligible amount of friction.
I'm not sure if I live in some kind of parallel world, because I never had any problems grokking Nix or NixOS. I started with this book[0] and haven't ever really been confused.
I haven't tried it in almost a year, but using Claude Code for setting up my nix config back then worked amazingly well. I've only dabbled in NixOS, and I'm very tempted to it for my workstation when I reinstall it in the next month.
Given how much Claude Code + Opus have improved in the last year, I'd give it a fighting chance to make a nice Nix config. I'll probably start setting up a spare laptop to get the base configs dialed in before switching over to it.
Flakes are de facto standard at this point. Expressions are easy once you get used to them - in fact the Nix language grows on many of us, including myself, once you internalize it.
Using AI to generate Nix config is a superpower. Because the entire system is declared in a single set of config, you can basically spell cast any system you want. I one-shotted a Linux distro with custom branding for boot, installation screen, and login screen, and VPN and dev tools installed and configured by default, at a fortune 500 tech company.
Obligatory Guix plug. I've found it way easier to understand, but it has teething issues that NixOS doesn't (latest for me was a few problems with DMs). And according to an acquaintance of mine, it works reasonably well with an LLM.
Yep disk space and learning curve are the two major downsides to Nix. The former has never been a problem for me in practice, just run garbage collection once a month. The latter was a big problem, but is now mitigated for most people by LLMs.
Yes, however the space is not „used up” in a classic sense. It’s a cache, so you can give up some of it and reclaim your space. Fresh after a full cleanup it won’t take much more than a regular distro.
If you don't mind a very limited set of software, the way tinycorelinux is setup can also allow multiple different tcz installed
These two Linux distros essentially allow two different versions of same software/libraries (glibc/python whatever) installed
(Gobolinux explicitly states that whereas I find it to be an unintended but elegant consequence for tinycorelinux but I recommend taking a look at Gobolinux)
The problem I have with nix is that I just don't need another hobby. Keeping everything up to date in an ever changing environment like an os just looks like chore. I install my system and image it every week and keep maybe the initial and a monthly snapshot. Why would nix be better in my case? Maybe I am missing something essential but I also don't bork my system that often tbh.
For me, it's the difference between taking your medicine a bit at a time on your own schedule or taking it all at once as an unwelcome surprise. Sure, setting up file system mounts or adding udev entries is easier to do once in Ubuntu than in NixOS, but I only need to do it the one time with NixOS. Thereafter, the config serves as both documentation and backup. For a hobby self hoster like me who occasionally shoots himself in the foot and has to rebuild a system, it is ideal. I don't know if it really saves me time, but I do know it saves my sanity.
I am no nix whiz, but it's the only OS I run outside of containers. Anything I can't easily get with my nix config I shove into a container, run it as a quadlet, and call it good.
Imo it's the opposite. Since the system is defined in config files, an AI agent can look at live system state/errors vs. the config file and do all the work of figuring out the issue.
Also, using higher level modules like home manager makes things more declarative and less fiddly since someone else is maintaining the lower level.
Maybe nix is a downgrade for what you do. But I loved nix so much that I also migrated to nix on macOS (nix-darwin). No more homebrew.
nixos updates tend to be a lot less eventful than others distro, in fact the way it largely prevent system borking when updating, is spiritually freeing.
NixOS kind of extends the idea of reproducible builds. Any snapshot could be a guarantee that things just work. This can also be extended onto the user base - if one user has solved a problem, it should be solved for all of them. So we can jump from guarantee to guarantee here.
My only gripe with NixOS is Nix. I think that this is also the biggest drawback of NixOS. I don't have an alternative; but perhaps it may be better to allow any format to be used, rather than force nix onto everyone.
Another issue is that, for a reason I don't quite understand, a few years ago NixOS' quality appears to have gone down, e. g. nobody cares about documentation anymore. This is probably not a huge obstacle per se, but I did not feel I should invest that much into nix (which I dislike) when the documentation leaves a lot to be desired. Ironically this also means that the whole idea behind NixOS, falls flat, if the documentation is poor. They really should make the same guarantees for their documentation, just as they do for the software ecosystem too.
Nobody cares about documentation anymore though - AI has won. Just try finding high quality documentation via google search; it is slop world now.
I switched over to Nix about a year ago. I was a Windows user before that for 30 years and tried Linux a couple of times, but it never stuck. Now I know I will never touch Windows again. With NixOS I've finally found a system that actually works for me — and the full OS configuration is in a repo. My god, I love it so much. Sometimes I even prefer nix-shells over uv for quick one-off Python scripts. I cannot sufficiently convey how absolutely barbaric everything else feels in comparison. Not having Nix would be like having to work on code without Git — absolutely unacceptable. And it really isn't that much work — you do it once. The next time you set up a new system, without Nix, you'll have to do the full configuration all over again.
Have you heard of any good projects for running isolated containers in NixOS that are cheaply derived from your own NixOS config? Because that is what I want. I want a computer where I can basically install every non stock app in its own little world, where it thinks "huh, that is interesting, I seem to be the only app installed on this system".
Basically, I want to be able to run completely unverified code off of the internet on my local machine, and know that the worst thing it can possibly due is trash its own container.
I feel like NixOS, is one path toward getting to that future.
If containers are safe enough for ur use case then just use nixos containers they just a few more lines to setup in a regular nixos config
If it isn't enough there's microvm.nix which is pretty much the same in difficulty /complexity, but runs inside a very slim and lightweight VM with stronger isolation than a container
depends whether you consider rootless Docker "cheap". I tried running ZeroClaw in a Nix-derived Docker (spoiler - it was a bad idea to use ZeroClaw at all since the harness is very buggy) and there is still a potential for container escape zero-days, but that's the best I've found. also, Nix's own containerization is not as hermetic as Docker; they warn about that in docs
sounds like you want qubes os https://www.qubes-os.org/
I'd love NixOS more if they had any decent documentation.
Everything seems scattered around a dozen forums, a hundred old blog posts, and a thousand issues of "this work on my machine (3 releases ago)".
It doesn't help that there are two NixOS wikis. nixos.wiki and wiki.nixos.org.
wiki.nixos.org claims that nixos.wiki is outdated and unofficial. But both appear to receive updates, and which one wins the SEO game is a coinflip whenever i google a nixos question.
A lot of us use NixOS/nix yet haven't read any documentation nor hand-written nix ourself. That's Claude Code's job.
If only.
Claude Code has to be actively steered, because while it knows some nixpkgs it surely doesn’t know it enough. E.g. it was absolutely incapable of fixing lldap settings after system upgrade from 25.05 to 25.11. It just prodded around blindly, producing meaningless configs instead learning how the module works.
NixOS docs work for me, but I tend to just go for the nixpkgs source instead. Manuals document options but not how those are actually plumbed through, nor what remains behind the scenes like all systemd unit settings). Claude can do this too, but it goes quite weird roundabout ways with a lot of weird `find /nix/store` and `nix eval`s to get to it, slow and token-hungry (and not always accurate).
This said, Claude is very helpful at checking logs and providing a picture of what’s going on - saves ton of time this way. Plus it can speed up iterating on changes after it’s fed enough knowledge (but don’t expect it to do things right, that’s still on you). It has breadth of it, but not the depth, and that shows at almost any non-trivial task.
You don't have Claude Code git clone nixpkgs and home-manager for local reference?
I feel you on the nix store + nix eval death loop, though it gleans real info. If I weren't on the Claude Max plan I'd probably feel more of the pain. And context is now 1MM tokens which means you're not running out just as it's starting to piece things together, heh.
I do, but it somehow tends to forget how to do things right now and then - despite having notes in memories system - and starts to do them in its own weird ways.
I’m going to experiment with skills next, or maybe make it build a few helper scripts for itself to quickly get some module source from nixpkgs matching flake.lock without having to think of it all. I’m positive about Claude for nix management, merely saying it’s not something that “just works” for now and reading nix code is still on the human part of the tandem.
This said, to be fair - when it gets the approach right, it excels. I was setting up Ente for photos backup and sharing, and it produced a nice overlay with custom patches for my needs from just “figure out why /shared-albums/ redirects wrong and fix”. Found the module, the package, pulled source, analyzed it, proposed a patch (settings weren’t enough), did it - I only had to test, and only because I haven’t provided it with a browser. Felt amazing.
I would have never become a power user of Linux were I used LLM to do the installation of Gentoo once upon a time. :( So do you guys not know much about the distro you are using, or how does this work? I honestly thought your comment was sarcasm, but apparently it is not.
NixOS is high-level declarative, so you're reading high-level config diffs when the AI agent is pitching changes.
Unless you're brand new to Linux or computing, it's not a mystery what a given nix config change is ever doing.
You can probably guess what this does:
The things to know about the OS are high level things. The rest of its idiosyncrasies you learn just in time through daily exposure like anything else.> Unless you're brand new to Linux or computing, it's not a mystery what a given nix config change is ever doing.
I am not brand new - and I don't know what the heck the config is doing.
That is why I rely on documentation.
The "code is self-explanatory" is always an attempt to not have useful documentation and try to rationalise that problem away.
Nothing about this changes with Nix nor AI agents.
You can read documentation on an as-needed basis or to your heart's content.
Though I don't like relying on documentation since it's error prone and goes stale. If it's something I care about, I have an AI agent git clone, read the source, and summarize it for me.
Kind of an interesting thing here where if this is how you view it, it kind shows in itself why you don't actually need it.
Like what is ultimately the difference here for you vs a non-nix user who, as author says, is just dealing with some big ambiguous pile of state? It kind of takes away any upside to using nix, and probably just creates more friction for your AI than just running ubuntu/apt stuff.
The idea is you can keep configuration "in your head" such that you can reason and iterate and fully know what your system is like at any moment. If you actually don't care about that, you aren't getting anything out of it!
ChatGPT is very good at pulling it together to give you working code. Not on the first try, but on the third try it usually works.
my entire system is configured using a flake i built with coding agent and skills to tell it how to configure things in nixos heh
What I like most about nixos is that you can have deterministically cached packages you don't need to rebuild every time in your ci.
It's also simple to setup dev environments with nix.
Nix in CI seems like a really excellent match. I don’t care much about the ATproto space - but Tangled has built their CI system on Nix and I find that really compelling. CI Caching is just awful with GitHub actions - so it made me disappointed that Forgejo went that route.
This is exactly why I made https://nix-ci.com/ And it supports Forgejo, GitHub, and GitLab.
After having done the switch to nixOS, I can confidently say that managing a system any other way (like with apt/brew + 20 handwritten bash scripts) really is neanderthal technology and nix is superior in every single way.
It's also great for the AI era, copilot is really good with that stuff.
Although I’ve never committed to using nix system-wide, I do enjoy nix-based using https://devenv.sh/ for the very reasons described in the article. It’s much easier than local containers for development.
Hm. How it's different from home-manager?
I've never really understood how version pinning is meant to work with devenv.sh or Nix more generally. If I whack a .tool-versions file in my repo, everyone who works on it can use install the exact same versions of the relevant tools using asdf. That's low tech and imperfect (and certainly not a replacement for all of Nix's features), but it works as far as it goes. None of the examples on the devenv.sh page demonstrate pinning of tools/packages to specific versions.
As best I can tell, Nix enthusiasts think that this is an XY problem and that I shouldn't want to pin individual tools/packages to arbitrary versions. But the thing is that I am a rude barbarian who very much does want to do this, however philosophically misguided it might be.
If you use the flake system (which is technically still experimental, but everyone is already using it anyway), all your flake 'inputs' are automatically pinned in a flake.lock file that can be committed to git for reproducibility. So if you add nixpkgs as a flake input, your nix expressions will always be referring to the same exact package versions until you update the lock file.
The downside is that flake inputs refer to other flakes, not individual packages, so if you update the nixpkgs input it will upgrade all of your packages at once. For some packages such as Python, nixpkgs tracks multiple major versions so you can loosely pin to that version. You can also include nixpkgs as an input multiple times under different git tags/commits and only use that input for some of your packages to effectively pin them. You could keep using one nixpkgs but override the package's source to build it for a specific version/commit, but this setup could break in the future, because the derivation (and therefore build instructions) will keep evolving while your package's version will not. Or, if you really wanted to, you could straight up just copy the derivation from nixpkgs into your local repository and use that instead.
Nix is quite flexible so there's more options than just these, it just takes a little getting used to to find out what's possible. I don't use devenv myself, but some quick googling reveals it works just fine with flakes, so I would try that to see if it suits your needs.
Can you help me understand why devenv is needed instead of a shell like this/what is gained?
To be honest, I don’t know. I just enjoy the simplicity of devenv. It’s the right amount of user friendly.
I tried NixOS and failed miserably. I've pointed at to the Fedora Atomic distros, which are also immutable, and apparently incomparably easier to setup.
I'm tempted to give it a shot, with the extra bonus that I've never dabbed with a fedora-based distro.
I tried fedora silverblue for a while, but the way it works is that it builds a new root fs image whenever you change the installed packages, this makes system package changes take comparatively long vs a traditional os. They suggest installing most apps via flatpak, which is okay as long as you can deal with flatpak idiosyncrasies.
I also tried fedora coreos for a vm + container host, but found the recommended method to configure the system with ignition files and one shot systemd units to be too involved for making a one off system, and it’s probably better for a cloud deployment with many identical nodes.
In all fairness, Nix is similarly slow.
I don’t any experience with Nix - but how does it handle software which runs its own updating processes outside the package manager? Specifically thinking about software like Discord, Slack, Docker Desktop, Jetbrains Toolbox, etc.
Is the Nix-ism to just reject using such software?
So Discord, and quite a lot of software like this has actually two layers of updates. There's updates of the web page (which is basically writing a bunch of JS to the home directory) which NixOS does nothing to prevent, and then there's updates of the host program (i.e. Electron) which NixOS disables.
Jetbrains Toolbox is in a sort of different category with tools like Rustup, since it's a package manager of its own. If you manage your IDEs with Toolbox, then your IDE versions are "outside Nix" and not managed by Nix. It's just packaged into its own pretend FHS environment and then doesn't know anything about it being on Nix. That said, updates of Toolbox itself will need to happen through your package manager.
As a last comment, why run Docker Desktop on Linux at all? Like I understand on Windows and Mac - docker is inherently tied to Linux so the Windows/Mac apps abstract away the fact that it's running a VM and doing a bunch of port mapping and filesystem mounting under the hood so you can pretend it's not running on a VM, but on Linux I've always just installed docker straight onto the host.
There’s more to Docker Desktop than just “oh it’s just docker underneath”
1. Unified experience across Windows, Mac, Linux
2. The security posture is much stronger by default. Many people, who would probably be considered the “target audience” for Docker Desktop, don’t bother to make docker-ce rootless, or don’t use podman, so running it in a VM is better, though admittedly often annoying.
3. Not everybody is a CLI warrior. Docker Desktop gives a decent GUI, ways to monitor and control containers visually, and even deploy kubernetes with a single click.
This is a really helpful explanation - thank you!
Regarding Docker Desktop on Linux - yeah definitely not strictly necessary. Sometimes it’s just convenient to have a UI instead of fumbling around trying to remember some cli incantation to check for dangling volumes or what-have-you. I think ideally I want to move to Podman anyways - but I’m using pop_os as my dev distro at the moment and am stuck on an older version which doesn’t have their native `podman compose` implementation yet
No there’s a nerd who will obsessively submit the latest version of any popular software that does that to nixpkgs. Or suggest you use the flatpak.
Except if you go look at nixpkgs half of the technologies grandparent listed are either missing entirely or in a hilariously broken state.
The true answer is that there is just some software that is antithetical to the philosophy of nix. It’s not necessarily nix’s fault that this is the case, but their purism towards resisting opaque binary blobs going into the store reflects on the actual state of what’s available in nix.
You need some impure, nonreproducible way of managing that software. So on nix Darwin I let these opaque binary blobs manage themselves via homebrew and use nix for every other case possible
That's not much different than other distros, because the way auto-update usually works, is it can't use root permissions or the system package manager (in any distro), so it has to install the newer version in $HOME. Once the update is installed, the system package becomes a trampoline to that.
I tried Discord, and this one seems to download some updates on first run, but the version sticks to the one from the system (0.0.127, latest is 0.0.129). So I assume it just doesn't update, or it tries to and fails.
For a personal desktop environment, I just install them normally when there's no up to date nixified option.
For some things I've vibe-coded a nix module on github that uses a scheduled github action to check for underlying app updates and then it generates a new hash and tags a release.
I've done that for claude code and cursor, which is also an opportunity to let me manage their config files from my nix config.
I run NixOS and the number of times ive been able to install something 'normally' (not via nixpkgs/flake) is approximately zero. You cant go to a website and download a binary and just run it. Almost every program references a shared library and wont be able to find it.
Nixpkgs is very complete in my experience, and in the instances where its not, someone usually has made a flake. The only times ive had to custom-make a flake were extremely new programs, or extremely old ones. Often the newer programs had PRs waiting on nixpkgs anyway, and were only a few days away from building properly in nixos-unstable.
Usually u can run almost any binary by setting up once a fhs. Or using steam-run
And there's also nix alien and similar tools as alternative
But indeed usually you end up using patchelf , tell the inputs of a binary n just make a regular nix package from it
They said Nix, so I was thinking about macOS + nix-darwin when I wrote that.
You're right. When I tried using NixOS as my main desktop experience for a few months, I ended up with a custom derivation for various apps I used. That's probably why I made the claude code and cursor modules in the first place.
But I'm also remembering I made my own keepassxc module because keepassxc wants to be able to write to its config file, but I also want to configure it from nix, so I had to make my module use an activation-time script to merge nix config into the keepassxc config file.
I lost interest in NixOS for day to day personal computing, though vibe-coding modules like that wasn't as big of a dealbreaker as there being almost zero laptops that compete with a Macbook.
The other pain is Linux desktop environment stuff in general like dealing with interactions between a Steam game, wayland, and wayland-satellite. Though NixOS helped there since it was easy for an AI agent to investigate the issue, inspect the nix config, and make a targeted, commented patch that shows up in git.
really good question.
right now I have bought into the Nix koolaid a bit.
I have NixOS Linux machines and then nix-darwin on my Mac.
I use Nix to install Brew and then Brew to manage casks for things like Chrome what I'm sure updates itself. So the "flake.lock" probably isn't super accurate for the apps you described.
nix & nixos are by far the worst way to manage system configuration, except for any other way that's been tried. imagine if there was something with declarative system configuration _not_ written in an insane undebuggable recursive nightmare of a language/stdlib? oh well, I'll keep using it, because what other options are there?
guix would like a word
+1, Guix is quite good with some tricks up it's sleeve compared to Nix.
I am not a fan of S-expressions but using scheme is more reasonable than nix+bash to me.
On the negative side, guix can be slow. It is also not a very pragmatic os. NixOS does non-free firmware and drivers without issue. You need to jump through some hoops for this with Guix. This is not an issue if you plan to run guix in a VM though.
I mean it's pretty wild to take s-expressions and not call them extremely terrible to read. The nix language sucks really badly, but I gladly take it over writing S-expressions.
It reads almost the exact same as any functional C-style language. Not to mention that specifically for Guix, you're going to be writing the (name value) form for 99% of it.
My love for NixOS really became clear when I realized I never have to write Nix again by hand.
A WIP NixOS config for working with agents:
https://github.com/dangirsh/tsurf
Same. I have a full homelab and multiple macs, can’t say I’ve written a line of real Nix code by hand.
If you’re itching to try Nix, now is the time.
Same.
Can't imagine going back to the status quo where my system is the accumulation of terminal commands over time instead of a config file.
Not to mention the non-idempotent python + bash + ssh hell of Ansible, or awful DSLs such as Salt, Puppet, Chef, etc.
I love Nixos. Having a deterministic system is such a great way to know what your system is capable of. The only thing that bothers me is that when I rebuild my system after updating the lock file, if a package is broken the whole upgrade become impossible.
This is niche and HN is full of these back and forth comments. One thing which a particular type of crowd will appreciate is being able to apply simple patches to constantly-up-to-date packages.
For an example, I love atuin but it, by default, skips commands starting with space. Currently it's not configurable and while I wait for time to submit a PR or for the issue to be resolved, make a single line `patch` which just removes the part of the `if` statement which checks if it starts with space. So easy, took 5 minutes (also had to comment out 1 test).
And now on home-manager debian or nixos server, I get up to date atuin with that one patch. It downloads rust, etc, compiles, and then that's garbage collected away
Same but with kernel. What lead me to nixos: company gave me a laptop with iGPU that wasn't supported by any released linux kernel. There were patches waiting to be merged, with nixOS making an installer image that supports my machine was simple.
NixOS is great. Nix the language is just awful. I still use it for my Dev laptop and for Home Manager on all my devices.
The idea is so good it’s as close to platonic as it gets. The user experience of writing your own nix expressions is so bad that it makes me angry every time I try. Not only that, but at some point the beginner help (!) meta became »use flakes, don’t do what the existing tutorials tell you, yes flakes are unstable beta and there are no tutorials but use it I beg you«. No, please, let me choose my own way to learn!
I haven’t given it a shot in the LLM age yet though, and trying out NixOS in a VM is not only easy, it is practical – in the sense that when you’re happy, you can simply boot that same config/OS anywhere else by just installing that config. And I’ll never forget that one time where I completely borked my everything in the VM, did a kernel rollback with like 3 command line args and a reboot, and the OS was, well, rolled back. As I said, almost platonic.
What I can recommend is using nix-the-package-manager. Whenever I need the newest version of something, `nix-env -i <whatever>` and it’s there and works. If it doesn’t, roll back. If I need a different version, that’s on nixpkgs as well, with the same negligible amount of friction.
I'm not sure if I live in some kind of parallel world, because I never had any problems grokking Nix or NixOS. I started with this book[0] and haven't ever really been confused.
[0]: https://nixos-and-flakes.thiscute.world
>I haven’t given it a shot in the LLM age
I haven't tried it in almost a year, but using Claude Code for setting up my nix config back then worked amazingly well. I've only dabbled in NixOS, and I'm very tempted to it for my workstation when I reinstall it in the next month.
Given how much Claude Code + Opus have improved in the last year, I'd give it a fighting chance to make a nice Nix config. I'll probably start setting up a spare laptop to get the base configs dialed in before switching over to it.
LLMs are a real gamechanger for Nix, highly recommend giving it a go again.
Flakes are de facto standard at this point. Expressions are easy once you get used to them - in fact the Nix language grows on many of us, including myself, once you internalize it.
Using AI to generate Nix config is a superpower. Because the entire system is declared in a single set of config, you can basically spell cast any system you want. I one-shotted a Linux distro with custom branding for boot, installation screen, and login screen, and VPN and dev tools installed and configured by default, at a fortune 500 tech company.
Obligatory Guix plug. I've found it way easier to understand, but it has teething issues that NixOS doesn't (latest for me was a few problems with DMs). And according to an acquaintance of mine, it works reasonably well with an LLM.
nixos is love. nixos is life. once you grok it, there's no going back. see you on the other side.
doesn't it use up a lot of disk space compared to other distros because of the way everything is set up?
Yep disk space and learning curve are the two major downsides to Nix. The former has never been a problem for me in practice, just run garbage collection once a month. The latter was a big problem, but is now mitigated for most people by LLMs.
Disk space is not an issue as long as you don't try to install the entirety of Texlive.
Yes, however the space is not „used up” in a classic sense. It’s a cache, so you can give up some of it and reclaim your space. Fresh after a full cleanup it won’t take much more than a regular distro.
Yes. But disk space isn't exactly the most valuable resource you have as a developer/power user
actually once I garbage collect, nixos actually uses up less disk space for me than other distros
Use nix.optimise.automatic = true in the config and perform nix-collect-garbage if necessary. With this it doesn't take much.
Most people who try Nix either quit in the first week or never go back to anything else. There is no in between.
What would the in between be?
Use it for a month or two and decide it's not for you.
That is in between "use it for very short period of time" and "use it forever"
Using a regular mutable system and Nix on top using Home Manager for example.
Gobolinux comes to mind.
If you don't mind a very limited set of software, the way tinycorelinux is setup can also allow multiple different tcz installed
These two Linux distros essentially allow two different versions of same software/libraries (glibc/python whatever) installed
(Gobolinux explicitly states that whereas I find it to be an unintended but elegant consequence for tinycorelinux but I recommend taking a look at Gobolinux)
Using it for a year or so and then try another OS is my guess
The problem I have with nix is that I just don't need another hobby. Keeping everything up to date in an ever changing environment like an os just looks like chore. I install my system and image it every week and keep maybe the initial and a monthly snapshot. Why would nix be better in my case? Maybe I am missing something essential but I also don't bork my system that often tbh.
The configuration system is way more stable then it seems. You write it once and then pretty much never touch it again.
For me, it's the difference between taking your medicine a bit at a time on your own schedule or taking it all at once as an unwelcome surprise. Sure, setting up file system mounts or adding udev entries is easier to do once in Ubuntu than in NixOS, but I only need to do it the one time with NixOS. Thereafter, the config serves as both documentation and backup. For a hobby self hoster like me who occasionally shoots himself in the foot and has to rebuild a system, it is ideal. I don't know if it really saves me time, but I do know it saves my sanity.
I am no nix whiz, but it's the only OS I run outside of containers. Anything I can't easily get with my nix config I shove into a container, run it as a quadlet, and call it good.
Imo it's the opposite. Since the system is defined in config files, an AI agent can look at live system state/errors vs. the config file and do all the work of figuring out the issue.
Also, using higher level modules like home manager makes things more declarative and less fiddly since someone else is maintaining the lower level.
Maybe nix is a downgrade for what you do. But I loved nix so much that I also migrated to nix on macOS (nix-darwin). No more homebrew.
nixos updates tend to be a lot less eventful than others distro, in fact the way it largely prevent system borking when updating, is spiritually freeing.
What I'd like to see is Omarchy implemented via the Nix package manager. (Seems like a good project for AI, actually.)
NixOS kind of extends the idea of reproducible builds. Any snapshot could be a guarantee that things just work. This can also be extended onto the user base - if one user has solved a problem, it should be solved for all of them. So we can jump from guarantee to guarantee here.
My only gripe with NixOS is Nix. I think that this is also the biggest drawback of NixOS. I don't have an alternative; but perhaps it may be better to allow any format to be used, rather than force nix onto everyone.
Another issue is that, for a reason I don't quite understand, a few years ago NixOS' quality appears to have gone down, e. g. nobody cares about documentation anymore. This is probably not a huge obstacle per se, but I did not feel I should invest that much into nix (which I dislike) when the documentation leaves a lot to be desired. Ironically this also means that the whole idea behind NixOS, falls flat, if the documentation is poor. They really should make the same guarantees for their documentation, just as they do for the software ecosystem too.
Nobody cares about documentation anymore though - AI has won. Just try finding high quality documentation via google search; it is slop world now.