The Shanghai airport maglev used to go around that speed too (~430km/h) over twenty years ago. But these new trains are regular trains running on regular (but specialized and high quality) tracks. There's probably no more need for maglev now that you can run on regular (well not exactly) tracks.
It does require really good maintenance-of-way work.
Having all trains inspect the track is feasible. The latest round of Shinkansen trains does that. They're moving away from running a Dr. Yellow track inspection train every 10 days.[1]
There are high fps cameras that monitor the overhead lines on every carriage, maybe also pointing at the rails? It is a engineering marvel though, the rides are so smooth, in my home country the trains have issues with leafs on the tracks … lol
Sensors all over the tracks? There’s probably many different sensor strategies you could use to detect imperfections.
I know that modern roller coasters are outfitted with a bunch of stress, vibration, conductivity, etc sensors. There’s a theme park near me where huge fast roller coasters run all day every day all season. The speeds aren’t as high but I bet given the twists and turns the stresses and tolerances are worse.
A 450kph limit for the rolling stock is great, but how many lines are actually capable of these speeds? There's only a single line (Chengdu–Chongqing, currently under construction) which is designed for 350kph, with sections capable of 400kph. Aside from that, most lines are at 350kph - unless I'm missing something.
> Perhaps oddly, this is superior to first class, where seats are arranged in a 2-2 layout; second class carriages have a tighter 2-3 configuration.
I guess the writer of the article does not really ride trains, the terminology is different from airlines.
First class just means better than second class (it's usually a bit better), and 2-2 seat configurations are very common. "Business class" in trains is a neologism.
China also maintains a legacy line of trains, 绿皮火车, that drive at a slower speed and service smaller cities (btw they seem to have been upgraded a lot in the last 3 years, from hard wooden seats to cushioned seats and bed). The best thing (or the worst ;) is that you can smoke in the gangways, which just seems absolutely wild to me. But it was very welcomed during my 37 hour train ride.
The one I took was a night train to/from Xian, and had fixed beds instead of seats. It makes sense for bigger cities to have this sort of a service available, but it would also make sense if smaller cities have these as daytime trains with proper seats.
Wow I though 300 Kph was some kind of physical limit. I mean every high speed train in the world used to max out at 300.
Now it feels like it was just lack of competition. Maybe now other countries will start producing lines and trains capable of 400 Kph and hopefully its not a China only thing going forward.
There is show and there is reality: French TGV achieved 574,8 km/h in 2007 for show, but it was under specific conditions, not in real world conditions.
While it is technically proven that it is possible to do 400+km/h on rail, it's not practical: maintenance, wear, noise, turns, embranchement, and overall cost, ... many considerations that are probably less important for Chinese railway now, which needs some "show".
300kph is the limit because aerodynamics make that about the best compromise on the effeciency cury. higher speeds are completely possibly - but air planes running with much less atmospheric drag start to become the better option.
of course the above is all about compromise and you can emphasize whatever numbers you want to get different results.
Edit: it is often a good idea to have everything capable of faster speeds - say 350km/h. You don't normally want to use those speeds, but if a train gets delayed (as happens) you can use that extra speed to make up time. Just don't let this become a normal thing.
Like pretty much everything else, it's an optimization problem rather than a physical limit.
So running a train at 350kph is more expensive than 300kph, both in per-distance and pre-unit time terms. But if you can run more services that way then sufficient demand might make it economical. Also, if it's too slow, people may choose flying instead.
Maglev can go even faster but those have never been made economical, really. It's much more complicated and expensive.
It's a bit like how commercial planes have actually gotten slower. 747s used to fly closer to Mach 0.9. Now most commercial planes fly at around Mach 0.8. There are physical problems flying between Mach 0.8 and 1.2 but sometimes that doesn't matter so the best private planes top out at about Mach 0.93. Even then they rarely fly that fast.
I swear I have done over 400km/h here in China (402 to be exact) and recall they lowered the speeds at some point? Cant seem to find any articles nor my own photos (the trains have a speed read out in every coach).
Yeah, I remember 400+ km/h 10+ years ago from the airport into Shanghai. I remember seeing the speed read out creeping up, and then watching cars on the highways beside us move like snails by comparison.
We wanted to buy train tickets the other day, but it was just a lottery and no way to actually buy tickets in advance, do you know what's up with that? Buying flights was just normal so sadly we just did that.
All this talk about China makes me want to hop on a plane, but the visitor visa process is quite convoluted and laborious for stays longer than two weeks.
So wild considering that the USA would be an amazing place to visit (and live) if it were connected by proper rail. As it is if you’re not rich enough to fly private, it feels like going back to the Stone Age vs places with well developed high speed rail.
Why does kph sound like most cursed option. kilo per hour? Kilo what? kilowatt, kilogram? kilolitres? Well it is most likely in context, but still when I stop and think about it it feels icky.. I can accept p instead of /. But just entirely ignoring unit feels wrong... Also is speed of something slow ph?
Both kph and mph sort of follow a pattern of the first letter of each word in the unit being spelled out, but kmph reads ambiguously as k(mph) or (km)ph.
Of course, anyone caring about correctness would use the SI unit symbol, which is m/s.
The Shanghai airport maglev used to go around that speed too (~430km/h) over twenty years ago. But these new trains are regular trains running on regular (but specialized and high quality) tracks. There's probably no more need for maglev now that you can run on regular (well not exactly) tracks.
Did it? I took a ride on the Shanghai airport maglev around a month ago, and it never went above 300 km/h, which was a real bummer, to be honest.
I remember there were different speeds at different times last time I went, but it seems they reduced it in 2021 permanently.
https://en.wikipedia.org/wiki/Shanghai_maglev_train
Yes it did, at least earlier. I rode it in 2010.
At these speeds, how are they guaranteeing that the tracks are in PERFECT working order?
e.g. even a small earthquake that shifts the tracks a few inches would probably cause, at minimum, a degradation in service.
It does require really good maintenance-of-way work.
Having all trains inspect the track is feasible. The latest round of Shinkansen trains does that. They're moving away from running a Dr. Yellow track inspection train every 10 days.[1]
[1] https://www.railway.supply/n700s-trains-to-be-equipped-with-...
Japan has solved that 60+ years ago in a much more seismically active zone, it's not a major issue.
That’s fascinating, what do they do?
There are high fps cameras that monitor the overhead lines on every carriage, maybe also pointing at the rails? It is a engineering marvel though, the rides are so smooth, in my home country the trains have issues with leafs on the tracks … lol
Sensors all over the tracks? There’s probably many different sensor strategies you could use to detect imperfections.
I know that modern roller coasters are outfitted with a bunch of stress, vibration, conductivity, etc sensors. There’s a theme park near me where huge fast roller coasters run all day every day all season. The speeds aren’t as high but I bet given the twists and turns the stresses and tolerances are worse.
I suspect ~200 years ago in England people were saying pretty similar things!
A 450kph limit for the rolling stock is great, but how many lines are actually capable of these speeds? There's only a single line (Chengdu–Chongqing, currently under construction) which is designed for 350kph, with sections capable of 400kph. Aside from that, most lines are at 350kph - unless I'm missing something.
re: business class,
> Perhaps oddly, this is superior to first class, where seats are arranged in a 2-2 layout; second class carriages have a tighter 2-3 configuration.
I guess the writer of the article does not really ride trains, the terminology is different from airlines.
First class just means better than second class (it's usually a bit better), and 2-2 seat configurations are very common. "Business class" in trains is a neologism.
China also maintains a legacy line of trains, 绿皮火车, that drive at a slower speed and service smaller cities (btw they seem to have been upgraded a lot in the last 3 years, from hard wooden seats to cushioned seats and bed). The best thing (or the worst ;) is that you can smoke in the gangways, which just seems absolutely wild to me. But it was very welcomed during my 37 hour train ride.
These are night trains, or mostly night trains.
Good question. Before I only took them for short distances, are they ALL night connections? Makes sorta sense, I think?
The one I took was a night train to/from Xian, and had fixed beds instead of seats. It makes sense for bigger cities to have this sort of a service available, but it would also make sense if smaller cities have these as daytime trains with proper seats.
Never seen a sleeper only train! But maybe they exist?
Definitely they do, I remember not being able to sit because of the sleeper bed position, but people still smoking standing outside the cabin.
Wow I though 300 Kph was some kind of physical limit. I mean every high speed train in the world used to max out at 300.
Now it feels like it was just lack of competition. Maybe now other countries will start producing lines and trains capable of 400 Kph and hopefully its not a China only thing going forward.
There is show and there is reality: French TGV achieved 574,8 km/h in 2007 for show, but it was under specific conditions, not in real world conditions.
While it is technically proven that it is possible to do 400+km/h on rail, it's not practical: maintenance, wear, noise, turns, embranchement, and overall cost, ... many considerations that are probably less important for Chinese railway now, which needs some "show".
300kph is the limit because aerodynamics make that about the best compromise on the effeciency cury. higher speeds are completely possibly - but air planes running with much less atmospheric drag start to become the better option.
of course the above is all about compromise and you can emphasize whatever numbers you want to get different results.
Edit: it is often a good idea to have everything capable of faster speeds - say 350km/h. You don't normally want to use those speeds, but if a train gets delayed (as happens) you can use that extra speed to make up time. Just don't let this become a normal thing.
The French TGV managed to reach 574km/h, so 300km/h is not an hard limit. https://www.youtube.com/watch?v=EOdATLzRGHc
Like pretty much everything else, it's an optimization problem rather than a physical limit.
So running a train at 350kph is more expensive than 300kph, both in per-distance and pre-unit time terms. But if you can run more services that way then sufficient demand might make it economical. Also, if it's too slow, people may choose flying instead.
Maglev can go even faster but those have never been made economical, really. It's much more complicated and expensive.
It's a bit like how commercial planes have actually gotten slower. 747s used to fly closer to Mach 0.9. Now most commercial planes fly at around Mach 0.8. There are physical problems flying between Mach 0.8 and 1.2 but sometimes that doesn't matter so the best private planes top out at about Mach 0.93. Even then they rarely fly that fast.
In the case of private jets, the Mach figure is mostly a proxy for other performance metrics.
Flying an aircraft at max cruise can save a lot of time on longer flights, but it's also substantially more expensive.
I swear I have done over 400km/h here in China (402 to be exact) and recall they lowered the speeds at some point? Cant seem to find any articles nor my own photos (the trains have a speed read out in every coach).
Yeah, I remember 400+ km/h 10+ years ago from the airport into Shanghai. I remember seeing the speed read out creeping up, and then watching cars on the highways beside us move like snails by comparison.
That was the Maglev though?
Airline-like comfort, and airplane-like noise. It's surprising how much noisier the Shanghai Maglev gets once you approach 400kph.
I was going to guess this was a prestige project like the Shanghai airport maglev but Beijing<->Shanghai is probably a legit economic route for this.
I exclusively use trains here in China, its way chiller than flying and total time doesn't really differ.
We wanted to buy train tickets the other day, but it was just a lottery and no way to actually buy tickets in advance, do you know what's up with that? Buying flights was just normal so sadly we just did that.
Tickets are released only 15 days in advance. Popular lines tend to get sold out quite fast. Especially around festivals.
The sleeper cars are pretty nice for long hauls, too, why spend a day traveling when you could spend a night.
The views can be quite spectacular
All this talk about China makes me want to hop on a plane, but the visitor visa process is quite convoluted and laborious for stays longer than two weeks.
450kmph !, that IS realy realy fast
You'd think they'd be complaints about the sonic booms...
What's that, mach 586?
Seems a bit excessive.
China has almost caught up to the USA... \s
In terms of the railway? I'd say it caught up with Japan or France, and the US is not even in the race
So wild considering that the USA would be an amazing place to visit (and live) if it were connected by proper rail. As it is if you’re not rich enough to fly private, it feels like going back to the Stone Age vs places with well developed high speed rail.
lol, you can get a bullet train in Japan whenever to wherever and it'll be exactly on time.
No one else is remotely close to their network and won't be for a long time.
Personally I would’ve understood this as sarcasm on its own but the commenter even added the /s sarcasm tone indicator.
Come on now.
Is it just for me that `kmph` stood out? Seems like such a cursed way of saying kph or km/h.
Why does kph sound like most cursed option. kilo per hour? Kilo what? kilowatt, kilogram? kilolitres? Well it is most likely in context, but still when I stop and think about it it feels icky.. I can accept p instead of /. But just entirely ignoring unit feels wrong... Also is speed of something slow ph?
Both kph and mph sort of follow a pattern of the first letter of each word in the unit being spelled out, but kmph reads ambiguously as k(mph) or (km)ph.
Of course, anyone caring about correctness would use the SI unit symbol, which is m/s.
yes, I think it's just the US/UK doing that, else people write km/h.