If I were the author, I would skip the part about using the compiler explorer and reading the assembly. When I write C code, I need to satisfy the rules of the C language. Unless I’m debugging the compiler or dealing with performance issues, my experience is that reading the generated assembler and understanding it is usually a slow way of debugging. The author eventually did compile with -fsanitize=undefined but I would honestly do that first. It prints a nice error message about the exact issue as the author has shown.
I have to disagree. If you merely want to fix the problem, you can stop as soon as you find something that's awry and whose alteration removes the problem. But don't you want to understand the problem? Don't you want to see how the compiler can reasonably generate code that says a bool variable is true and false at the same time?
It’s about abstraction layers. Most of the time, understanding the generated assembler code isn’t useful when it comes to understanding the problem. It satisfies my curiosity sure, but the problem is at the C level, an undefined behavior.
Understanding what the C compiler generates is interesting, but without a corresponding intuition about the optimizer passes, such understanding is shallow and unlikely to be generalized to other problems in the future. You probably won’t even remember this the next time you debug another undefined behavior. On the other hand, if you were to know the optimizer passes employed by the compiler and could deduce this code from that, then it is a useful exercise to enhance your intuition about them.
I think it depends on your experience. I have a lot of experience from the Old Days™ and from developing for microcontrollers, so I find reading assembly very natural and straightforward. When coding for the really small MCUs I've often had the disassembly generated and shown on another window every time I incrementally build, and can check and make sure it's what I was expecting to see.
I do agree that knowledge of compiler optimizations is really important to working this way, though you'll eventually pick them up anyway. I don't see much value in looking at -O0 or -Og disassembly. You want the strongest stuff the compiler can generate if you're going to do this, which is usually either -O3 or -Oz (both of which are strong in their own ways). -O0 disassembly is... just so much pain for so little gain. Besides, -O3 breaks more stuff anyway!
For someone without this level of experience (and who isn't interested in learning)... yeah, I can see why you'd want to do this another way. But if you've got the experience already, it's plenty fast enough.
I think that's the kind of intuitive decision that comes from years of troubleshooting experience. It's not obvious that would be the place to start. It's impressive to me at least he got there.
Yikes. I think this article undersells the point somewhat. This line of code undermines the type system by spraying -1's into an array of structs, so the only surprise to me is that it took this long to break.
typedef struct
{
// If false use 0 for any position.
// Note: as eight entries are available,
// we might as well insert the same name eight times.
boolean rotate;
// Lump to use for view angles 0-7.
short lump[8];
// Flip bit (1 = flip) to use for view angles 0-7.
byte flip[8];
} spriteframe_t;
which is okay to splat with all-ones as long as `boolean` is either a typedef for a fundamental type(*) or an enum – because C enums are just ints in a trenchcoat and have no forbidden bit patterns! The C99 `bool`/`_Bool` is, AFAICS, the first type in C that has fewer values than possible bit patterns.
So yeah, on C99 and C++ this always had UB and could've broken at any time – though I presume compiler devs were not particularly eager to make it ill-behaved just because. But in pre-C99 it's entirely fine, and `rotate == true || rotate == false` could easily be false without UB.
---
(*) other than `char` for which setting the MSB is… not UB but also not the best idea in general.
C has no particularly strong type system, and it works on typical platforms with all types up to the introduction of _Bool. And maybe float/double, but I think it gives a NaN.
> 1. Explicitly set the C standard to C17 or older, so the code is built using the custom boolean type.
> Option 1) seemed like the easiest one, but it also felt a bit like kicking the can down the road – plus, it introduced the question of which standard to use.
Arguably, that's the sanest one: you can't expect the old C code to follow the rules of the new versions of the language. In a better world, each source file would start with something like
#pragma lang_ver stdc89
and it would automatically kick off the compatibility mode in the newer compilers, but oh well. Even modern languages such as Go miss this obvious solution.
On the topic of the article, yeah, sticking anything other than 0 or 1 into C99 bool type is UB. Use ints.
Yeah, it’s only kicking the can down the road if you’re the actual maintainer of the software.
If you’re just a packager, it’s your job to get the package to build and work correctly; for your own sanity, you should be making minimal changes to the underlying code to facilitate that. Get it building with the old language version and file a bug report.
> you can't expect the old C code to follow the rules of the new versions of the language
Well, to be pedantic, the entire point of the C standard, and the standard body, is that you should expect it to work, as long as you're working within the standard!
> Ah-ha! The generated instructions were ever so slightly different. This would be great news, if it wasn't for me forgetting about one little detail: I have zero knowledge of x86 assembly.
Lol'd at this. I've been there: "ah hah! I found you. hrm, now what does this mean..."
TFA makes me thankful my work doesn't involve C / C++. Learning it earlier in life was enough.
This brings memories - back when I was a student programming in Turbo Pascal 6, I got the same invalid bool (due to array range overflow) which was both true and false at the same time.
That is a fucking travesty. If there’s one thing we should be able to rely on C for it’s that it works with assembly, and it’s always been the case that 0 is false and any other value is true. That’s a compiler bug as far as I’m concerned. I don’t use C++ because it’s gone in a ludicrous unhelpful direction since 2000 or so, but it’s sad to learn that C of all languages decided to favor pedantry over working code.
Note that this is explicitly comparing two values, which is very different from checking whether a single value is true. Surely you wouldn't expect -1 == 0 to evaluate to true.
I still remember one of my first teachers of programming softly shaming me for writing a condition like
if (something == true)
I haven't done so ever since (1997), and thus I avoid the contrary (with == false) as well, using ! instead. But I would be a lot less ashamed if I knew that there are such conditions in production software.
I would also never guess that the problem described in the article may occur...
Excellent debugging journey.
If I were the author, I would skip the part about using the compiler explorer and reading the assembly. When I write C code, I need to satisfy the rules of the C language. Unless I’m debugging the compiler or dealing with performance issues, my experience is that reading the generated assembler and understanding it is usually a slow way of debugging. The author eventually did compile with -fsanitize=undefined but I would honestly do that first. It prints a nice error message about the exact issue as the author has shown.
I have to disagree. If you merely want to fix the problem, you can stop as soon as you find something that's awry and whose alteration removes the problem. But don't you want to understand the problem? Don't you want to see how the compiler can reasonably generate code that says a bool variable is true and false at the same time?
It’s about abstraction layers. Most of the time, understanding the generated assembler code isn’t useful when it comes to understanding the problem. It satisfies my curiosity sure, but the problem is at the C level, an undefined behavior.
Understanding what the C compiler generates is interesting, but without a corresponding intuition about the optimizer passes, such understanding is shallow and unlikely to be generalized to other problems in the future. You probably won’t even remember this the next time you debug another undefined behavior. On the other hand, if you were to know the optimizer passes employed by the compiler and could deduce this code from that, then it is a useful exercise to enhance your intuition about them.
I think it depends on your experience. I have a lot of experience from the Old Days™ and from developing for microcontrollers, so I find reading assembly very natural and straightforward. When coding for the really small MCUs I've often had the disassembly generated and shown on another window every time I incrementally build, and can check and make sure it's what I was expecting to see.
I do agree that knowledge of compiler optimizations is really important to working this way, though you'll eventually pick them up anyway. I don't see much value in looking at -O0 or -Og disassembly. You want the strongest stuff the compiler can generate if you're going to do this, which is usually either -O3 or -Oz (both of which are strong in their own ways). -O0 disassembly is... just so much pain for so little gain. Besides, -O3 breaks more stuff anyway!
For someone without this level of experience (and who isn't interested in learning)... yeah, I can see why you'd want to do this another way. But if you've got the experience already, it's plenty fast enough.
I think that's the kind of intuitive decision that comes from years of troubleshooting experience. It's not obvious that would be the place to start. It's impressive to me at least he got there.
> memset (sprtemp,-1, sizeof(sprtemp));
Yikes. I think this article undersells the point somewhat. This line of code undermines the type system by spraying -1's into an array of structs, so the only surprise to me is that it took this long to break.
`spriteframe_t` is defined as
which is okay to splat with all-ones as long as `boolean` is either a typedef for a fundamental type(*) or an enum – because C enums are just ints in a trenchcoat and have no forbidden bit patterns! The C99 `bool`/`_Bool` is, AFAICS, the first type in C that has fewer values than possible bit patterns.So yeah, on C99 and C++ this always had UB and could've broken at any time – though I presume compiler devs were not particularly eager to make it ill-behaved just because. But in pre-C99 it's entirely fine, and `rotate == true || rotate == false` could easily be false without UB.
---
(*) other than `char` for which setting the MSB is… not UB but also not the best idea in general.
C has no particularly strong type system, and it works on typical platforms with all types up to the introduction of _Bool. And maybe float/double, but I think it gives a NaN.
> 1. Explicitly set the C standard to C17 or older, so the code is built using the custom boolean type.
> Option 1) seemed like the easiest one, but it also felt a bit like kicking the can down the road – plus, it introduced the question of which standard to use.
Arguably, that's the sanest one: you can't expect the old C code to follow the rules of the new versions of the language. In a better world, each source file would start with something like
and it would automatically kick off the compatibility mode in the newer compilers, but oh well. Even modern languages such as Go miss this obvious solution.On the topic of the article, yeah, sticking anything other than 0 or 1 into C99 bool type is UB. Use ints.
Yeah, it’s only kicking the can down the road if you’re the actual maintainer of the software.
If you’re just a packager, it’s your job to get the package to build and work correctly; for your own sanity, you should be making minimal changes to the underlying code to facilitate that. Get it building with the old language version and file a bug report.
Rust does the right thing, with the per-crate
statement.> you can't expect the old C code to follow the rules of the new versions of the language
Well, to be pedantic, the entire point of the C standard, and the standard body, is that you should expect it to work, as long as you're working within the standard!
> For this, I used the Godbolt compiler explorer.
> Ah-ha! The generated instructions were ever so slightly different. This would be great news, if it wasn't for me forgetting about one little detail: I have zero knowledge of x86 assembly.
Lol'd at this. I've been there: "ah hah! I found you. hrm, now what does this mean..."
TFA makes me thankful my work doesn't involve C / C++. Learning it earlier in life was enough.
> After consulting some sources, I started translating the assembly instructions into plain Polish
Ah yes, obfuscation
This brings memories - back when I was a student programming in Turbo Pascal 6, I got the same invalid bool (due to array range overflow) which was both true and false at the same time.
That is a fucking travesty. If there’s one thing we should be able to rely on C for it’s that it works with assembly, and it’s always been the case that 0 is false and any other value is true. That’s a compiler bug as far as I’m concerned. I don’t use C++ because it’s gone in a ludicrous unhelpful direction since 2000 or so, but it’s sad to learn that C of all languages decided to favor pedantry over working code.
The code in question is:
Note that this is explicitly comparing two values, which is very different from checking whether a single value is true. Surely you wouldn't expect -1 == 0 to evaluate to true.You're not wrong. The processor has a perfectly good zero/notzero check. There was absolutely no reason for the compiler to check if x^1==0.
I still remember one of my first teachers of programming softly shaming me for writing a condition like
if (something == true)
I haven't done so ever since (1997), and thus I avoid the contrary (with == false) as well, using ! instead. But I would be a lot less ashamed if I knew that there are such conditions in production software.
I would also never guess that the problem described in the article may occur...