Nice to see this posted. I spent probably too much time on Stirling engines and associated stuff (heat engines in general, the Vuilleumier family of devices and other interesting bits & pieces).
It's so tempting, you think there has to be a way to make it work. But I haven't found one yet and I more or less gave up on it. The most practical ones that I'm aware of are in spacecraft for extreme cooling and in a commercially available generator.
If you've never seen one up close I highly recommend building a model of one and watching it run, it is complete magic compared to internal combustion engines which tend to be noisy and dirty. Stirling engines run so quiet you have to be right up close to realize it is running at all (and even then you probably will subconsciously put your hand on it to verify that it is not just your imagination).
The Philips company, when it still meant something, put together a whole slew of pilots: a boat and a bus, and an endless number of them in the lab. Fortunes have been sunk in these and with preciously little to show for it other than an extreme appreciation for how hard it is to make a really good seal.
Wurm et al's book is the standard in the field, it is very thorough and gives a very good grounding in the theory as well as some appreciation on why this is both a tempting and very hard subject at the same time. Most engines are hard to think of and relatively easy to engineer once you've thought of them. There are two exceptions, Stirling engines and Wankel engines and both have very strongly related problems. Solve the seal issue and the world will pave the way to your door with gold.
One interesting mention I can recall of one was in a airport-kiosk type thriller/science fiction novel where a humanoid robot developed by the military wound up in the jungles of South America assisting a group of disparate individuals --- it made a small Stirling engine using a lathe to power itself from the communal campfire --- always wondered if the physics of that would work out numerically.
Most likely not if it was made from stuff you can find the jungle but it is a very creative bit. I've had one running of a 10' solar concentrator, it was tiny (no more than a few hundred mW) but still, to see sunlight directly converted into motion without any steps in between is quite a neat thing.
The first working model engine I ever had (still have, in parts, in a crate somewhere) was a compact stirling engine, roughly 10 x 5 cm at the base, fantastic gadget for a single digit year old child.
IIRC there's a New Zealand company WhisperGen(?) that use them for power from waste heat from water heaters ...
Checking now, they seem to be used as marine power generation these days, I can't find the original site from 15+ years ago.
Nice to see this posted. I spent probably too much time on Stirling engines and associated stuff (heat engines in general, the Vuilleumier family of devices and other interesting bits & pieces).
It's so tempting, you think there has to be a way to make it work. But I haven't found one yet and I more or less gave up on it. The most practical ones that I'm aware of are in spacecraft for extreme cooling and in a commercially available generator.
If you've never seen one up close I highly recommend building a model of one and watching it run, it is complete magic compared to internal combustion engines which tend to be noisy and dirty. Stirling engines run so quiet you have to be right up close to realize it is running at all (and even then you probably will subconsciously put your hand on it to verify that it is not just your imagination).
The Philips company, when it still meant something, put together a whole slew of pilots: a boat and a bus, and an endless number of them in the lab. Fortunes have been sunk in these and with preciously little to show for it other than an extreme appreciation for how hard it is to make a really good seal.
Wurm et al's book is the standard in the field, it is very thorough and gives a very good grounding in the theory as well as some appreciation on why this is both a tempting and very hard subject at the same time. Most engines are hard to think of and relatively easy to engineer once you've thought of them. There are two exceptions, Stirling engines and Wankel engines and both have very strongly related problems. Solve the seal issue and the world will pave the way to your door with gold.
One interesting mention I can recall of one was in a airport-kiosk type thriller/science fiction novel where a humanoid robot developed by the military wound up in the jungles of South America assisting a group of disparate individuals --- it made a small Stirling engine using a lathe to power itself from the communal campfire --- always wondered if the physics of that would work out numerically.
Most likely not if it was made from stuff you can find the jungle but it is a very creative bit. I've had one running of a 10' solar concentrator, it was tiny (no more than a few hundred mW) but still, to see sunlight directly converted into motion without any steps in between is quite a neat thing.
The first working model engine I ever had (still have, in parts, in a crate somewhere) was a compact stirling engine, roughly 10 x 5 cm at the base, fantastic gadget for a single digit year old child.
IIRC there's a New Zealand company WhisperGen(?) that use them for power from waste heat from water heaters ...
Checking now, they seem to be used as marine power generation these days, I can't find the original site from 15+ years ago.
WhisperGen is the one I was thinking of.