While Claude Code might have been the reason this bug became triggered by more people, there are some of us who were hitting it without ever having used Claude Code at all. Maybe the assumption about what makes a page non-standard, isn't as black-and-white as presumed. And I wonder if the leak would have been triggered more often for people who use scrollback-limit = 0, or something very small.
Probably not a huge deal, but it does seem the fix will needlessly delete and recreate non-standard pages in the case where the new page needs to be non-standard, and the oldest one (that needs to be pruned) already is non-standard and could be reused.
> Probably not a huge deal, but it does seem the fix will needlessly delete and recreate non-standard pages in the case where the new page needs to be non-standard, and the oldest one (that needs to be pruned) already is non-standard and could be reused.
This is addressed in the blog post.
It is how the PageList has always worked, and also how it worked before with the bug, because during capacity adjustment we would see the wrong size. This shouldn't change any perceived performance.
And as I note in the blog post, there are alternative approaches such as the one you suggested, but we don't have enough empirical data to support changing our viewpoint on that whereas our current viewpoint (standard sizes are common) is well supported by known benchmarks. I'm open to changing my mind here, but I didn't want to change worldviews AND fix the leak in the same go.
Of all the things to be impressed by you about, your patience is commendable. I'd be losing my shit if someone couldn't be bothered to read what I wrote and just spout off about something I'd addressed in my writing, but I suppose that's why your bank account has two commas and a bunch more. Thank you for everything. Can we go flying sometime?
Great write-up. And, thanks mitchellh for Ghostty, I switched to it last year, and have not regretted it.
However, I am a somewhat surprised that the fix is reserved for a feature release in a couple of months. I would have expected this to be included in a bug fix release.
The moment you started talking about pages, I was like: “Ok, obviously memory pooled” and yup, it is. Then I said “obviously ring buffered” and yeah, essentially your scroll back reuse. Then I knew exactly where the bug was before getting to that part, not freeing the pages memory properly and sure enough - bingo! With some great looking diagrams of memory space alignment.
Kudos, that was a good read. Just remember that every time you do something novel, there’s potential for leaks :D
This works fine normally, but resizing the terminal would quickly trigger the crash - easy to avoid but still annoying!
I was already preparing myself to file a bug report with the easy repro, but this sounds suspiciously close to what the blog post is describing. Fingers crossed :)
This feels like a case of guessing at something you could know. There are two types of allocations that each have a size and free method. The free method is polymorphic over the allocations type. Instead of using a tag to know absolutely which type an object it is you guess based on some other factor, in this case a size invariant which was violated. It also doesn't seem like this invariant was ever codified otherwise the first time a large alloc was modified to a standard size it would've blown up. It's worth asking yourself if your distinguishing factor is the best you can use or perhaps there is a better test. Maybe in this case a tag would've been too expensive.
I like using AI for visualizations because it is one-time use throwaway code, so the quality doesn't matter at all (above not being TOTALLY stupid), it doesn't need to be maintained. I review the end result carefully for correctness because it's on a topic I'm an expert of.
I produce non-reusable diagrams namespaced by blog post (so they're never used by any other post). I just sanity check that the implementation isn't like... mining bitcoin or leaking secrets (my personal site has no secrets to build) or something. After that, I don't care at all about that quality.
The information is conveys is the critical part, and diagrams like this make it so much more consumable for people.
That's really cool. I was looking at them and thinking "I could probably make these with vanilla html/css but it'd be pretty tedious." Perfect use case for AI. I need to work on developing a reflex for it.
I've also started doing this, and it's surprisingly enjoyable to both do and even to read. The end result is often more readable to me than using a 3rd-party JS visualization library, because I only need to know standard HTML/CSS concepts to understand what's going on. And a side benefit is smaller pages with less bitrot due to being able to skip the dependencies.
I've been following the development of Ghostty for a while and while I have the feeling that there is a bit of over-engineering in this project, I find this kind of bug post mortem to be extremely valuable for anyone in love with the craft.
I hate to say it, but this probably would not have happened in a garbage collected language.
GC languages are fast these days. If you don't want a runtime like C# (which has excellent performance) a language like Go would have worked just fine here, compiling to a small native binary but with a GC.
I don't really understand the aversion to GC's. In memory constrained scenarios or where performance is an absolute top priority, I understand wanting manual control. But that seems like a very rare scenario in user space.
I agree that garbage collection is fine and Go indeed has an amazing garbage collector. Unfortunately, it also has the worst type system of all mainstream languages created in the 21st century, so the benefits are rarely worth the drawbacks.
You’ll probably be waiting a long time, since Rust very explicitly doesn’t have “leak safety” as a constructive property. Safe Rust programs are allowed to leak memory, because memory leaks themselves don’t cause safety issues.
There’s even a standard, non-unsafe API for leaking memory[1].
(What Rust does do is make it harder to construct programs that leak memory unintentionally. It’s possible but not guaranteed that a similar leak would be difficult to express idiomatically in Rust.)
The specific language feature you want if you insist that you don't want this kind of leak is Linear Types.
Rust has Affine Types. This means Rust cares that for any value V of type T, Rust can see that we did not destroy V twice (or more often).
With Linear Types the compiler checks that you destroyed V exactly once, not less and not more.
However, one reason I don't end up caring about Leak Safety of this sort is that in fact users do not care that you didn't "leak" data in this nerd sense. In this nerd sense what matters is only leaks where we lost all reference to the heap data. But from a user's perspective it's just as bad if we did have the reference but we forgot - or even decided explicitly not - to throw it away and get back the RAM.
The obvious way to make this mistake "by accident" in Rust is to have two things which keep each other alive via reference counting and yet have been disconnected and forgotten by the rest of the system. A typical garbage collected language would notice that these are garbage and destroy them both, but Rust isn't a GC language of course. Calling Box::leak isn't likely to happen by accident (though you might mistakenly believe you will call it only once but actually use it much more often)
I think the main part of Ghostty's design mentioned here that - as a Rust programmer - I think is probably a mistake is the choice to use a linked list. To me this looks exactly like it needs VecDeque, a circular buffer backed by a growable array type. Their "clever" typical case where you emit more text and so your oldest page is scrapped and re-used to form your newest page, works very nicely in VecDeque, and it seems like they never want the esoteric fast things a linked list can do, nor do they need multi-writer concurrency like the guts of an OS kernel, they want O(1) pop & push from opposite ends. Zig's Deque is probably that same thing but in Zig.
The issue isn’t linked list vs dequeue but type confusion about what was in the container. They didn’t forget to drop it - they got confused about which type was in the list when popping and returned it to the pool instead of munmap.
The way to solve this in Rust would be to put this logic in the drop and hide each page type in an enum. That way you can’t ever confuse the types or what happens when you drop.
Was going to say this, but I don't think anyone actually wants to hear that Rust actually would have helped here.
As you're saying, the bug was the equivalent of an incorrectly written Drop implementation.
Nothing against Zig, and people not using Rust is just fine, but this is what happens when you want C-like feel for your language. You miss out on useful abstractions along with the superfluous ones.
"We don't need destructors, defer/errdefer is enough" is Zig's stance, and it was mostly OK.
Impossible to predict this kind of issue when choosing a project language (and it's already been discussed why Zig was chosen over Rust for Ghostty, which is fine!), so it's not a reason to always choose Rust over Zig, but sometimes that slightly annoying ceremony is useful!
Maybe some day I'll be smart enough to write Zig as a default over Rust, but until that day I'm going to pay the complexity price to get more safety and keep more safety mechanisms on the shotgun aimed at my foot. I've got plenty of other bugs I can spend time writing.
Another good example is the type vs type alias vs wrapper type debate. It's probably not reasonable to use a wrapper type every single time (e.g. num_seconds probably can probably be a u32 and not a Seconds type), but it's really a Rorschach test because some people lean towards one end versus the other for whatever reason, and the plusses/minuses are different depending on where you land on the spectrum.
If you wanted to match Ghostty's performance in Rust, you'd need to use unsafe in order to use these memory mapping APIs, then you'd be in the exact same boat. Actually you'd be in a worse boat because Zig is safer than unsafe Rust.
Please don’t get defensive and spread silly FUD. You can be proud of what you’ve accomplished without feeling sad that a different language has strengths that yours doesn’t.
Calling unsafe mmap APIs not only is unlikely to run into the corner cases where unsafe Rust is tricky to get right, there’s “millions” of crates that offer safe APIs to do so and it’s fundamentally not hard to write it safely (it would be very hard to write it to have any issues).
And fundamentally I think Rust is much more likely to be easier to get high performance because the vast majority of safe code you write is amenable to the compiler performing safe optimizations that Zig just can’t do regarding pointer aliasing (or if it does brings all the risks of of unsafe Rust when the user annotates something incorrectly).
I don't know if this particular error would have been findable with zig-clr, but you don't need RAII. Errdefer/defer is enough, if you have an alogrithm checking your work.
> I think the main part of Ghostty's design mentioned here that - as a Rust programmer - I think is probably a mistake is the choice to use a linked list. To me this looks exactly like it needs VecDeque, a circular buffer backed by a growable array type.
This comment [0] by mitchellh on the corresponding lobste.rs submission discusses the choice of data structure a bit more:
> Circular buffer is a pretty standard approach to this problem. I think it's what most terminal emulators do.
> The reason I went with this doubly linked list approach with Ghostty is because architecturally it makes it easier for us to support some other features that either exist or are planned.
> As an example of planned, one of the most upvoted feature requests is the ability for Ghostty to persist scroll back across relaunch (macOS built-in terminal does this and maybe iTerm2). By using a paged linked list architecture, we can take pages that no longer contain the active area (and therefore are read-only) and archive them off the IO thread during destroy when we need to prune scroll back. We don't need to ever worry that the IO thread might circle around and produce a read/write data race.
> Or another example that we don't do yet, we can convert the format of scroll back history into a much more compressed form (maybe literally compressed memory using something like zstd) so we can trade off memory for cpu if users are willing to pay a [small, probably imperceptible] CPU time cost when you scroll up.
Edit: I'm getting a lot of down votes for this but nobody is saying why I'm wrong. If you think I'm wrong enough to down vote, please reply why.
I don't understand why that is the preferred fix. I would have solved it other ways:
1. When resizing the page, leave some flag of how it was allocated. This tagging is commonly done as the always 0 bits in size or address fields to save space.
2. Since the pool is a known size of contiguous memory, check if the memory to be freed is within that range
3. Make the size immutable. If you want to realloc, go for it, and have the memory manager handle that boundary for you.
Both of those not only maintain functionality which seems to have been lost with the feature reduction but also are more future proof to any other changes in size.
I didn't downvote, but I suspect it's an easy answer: the fix was like four lines.
At the end of the day, #1 and #3 both probably add a fairly significant amount of code and complexity that it's not clear to me adds robustness or clarity. From the fix:
```
// If our first node has non-standard memory size, we can't reuse
// it. This is because our initBuf below would change the underlying
// memory length which would break our memory free outside the pool.
// It is easiest in this case to prune the node.
```
#3, it seems, would require making a broader change. The size effectively is immutable now (assuming I'm understanding your comment correctly): non-standard pages never change size, they get discarded without trying to change their size.
#2 is interesting, but I think it won't work because the implementation of MemoryPool doesn't seem like it would make it easy to test ownership:
Thank you. I think each of my options are pretty trivial in C. I guess what I'm not understanding for #3 is if size is immutable, how the size changed which caused the issue? The post said they changed the size of the page without changing the underlying size of the allocated memory. To me this is the big issue. There was a desync in information where the underlying assumption is that size tells you where the data came from and that the size of the metadata and the size of the allocation move in tandem across that boundary.
#1 and #2 are fixes for breaking that implicit trust. #1 still trusts the metadata, #2 is what I'd consider the most robust solution is that not only is it ideally trivial (just compare if a pointer is within a range, assuming zig can do that) but it doesn't rely on metadata being correct. #3 prevents the desync.
I really don't understand the code base enough to say definitively that my ways work, which is I guess what I'm really looking for feedback on. Looking at the memorypool, I think you're right that my assumption of it being a simple contiguous array was incorrect.
ETA: I think I'm actually very wrong for #2. Color me surprised that the zig memory pool allocated each item separately instead of as one big block. Feels like a waste, but I'm sure they have their reasons. That's addCapacity in memory_pool.zig
I'm not 100%, but my understanding was that the non standard pages are always larger than the standard pages. If you need more than a standard page, you always get a freshly allocated non standard page. But when one was released, it was being treated as though it was standard sized. The pool would then reuse that memory, but only at a standard size. So every released non standard page leaked the difference between what was allocated and what was standard.
Which is to say, I don't think it was actually being resized. I think it was the metadata for the page saying it had the (incorrect) standard size (and the incorrect handling after the metadata was changed).
Yes that last point was what I meant. I see no reason that the metadata's size field should get updated without some realloc of the memory it points to. I think I'll need to look into the actual code to see what's going on there, though, because we may both be misunderstanding. It just seems very error prone to categorize how you free memory based on a field that by the time you get to `free` has no guaranteed relationship with where the memory came from. I think that should be fixed. What was done in the blog is more of a band-aid imo.
Thank you. Sometimes I get to like -4 or even -7 before it starts going up. It might be nice to graph it at some point to see my most varied comments. I'm at -2 right now
23 minutes later I'm at +2
6 minutes after, +5 +4min now +6, another 20 minutes +8. I think I'm in the clear
I just stopped caring about votes. It's often driven by inertia, and it can't differentiate a vote from someone who doesn't know anything vs a domain expert. Life is better once you stop caring about karma points.
I was wondering about this myself. My guess is no, since AFAIK the only way to do this sort manual memory management is to use unsafe code. But there's also things like the (bumpalo)[https://docs.rs/bumpalo/latest/bumpalo] crate in Rust, so maybe you wouldn't need to do this sort of thing by hand, in which case you're as leak-free as the bumpalo crate.
speaking of claude code in Ghostty, I’ve noticed I can’t drag and drop images into the prompt when the session is within a tmux pane. I miss that, coming from the mac terminal app, which allowed me to do so. I’d be willing to look into this myself, but mention it in case someone already knows where to start looking.
As you could see from TFA, getting a reliable reproduction case was the tricky part of fixing this bug, so "asking to prove it's real" is just a mean way of saying asking for reproduction steps, not gaslighting.
There are times where is just makes sense to read, measure and really understand why leaks, bugs and performance issues happen and vibe-coders will get stuck on this very quickly.
This excellent write-up from michellh explains the issue in depth and all his blogs in building Ghostty are a recommended read on the Ghostty's internals.
Similarly, these write-ups are a great read. Here is another one that documents a goroutine leak and how it was detected, fixed without restarting production. [0]
This is what most vibe-coders will NOT do when faced with a non-trivial issue, with a serious software product.
What contrast? I stand by what I said there. I just re-read every point and I would say the same thing today and I don't think my blog post contradicts any of that?
A user came along and provided a reliable reproduction for me (last night) that allowed me to find and fix the issue. Simultaneously they found the same thing and produced a similar fix, which also helped validate both our approaches. So, we were able to move forward. I said in the linked comment that I believed the leak existed, just couldn't find it.
It also was fairly limited in impact. As far as Ghostty bugs go, the number of upvotes the bug report had (9) is very small. The "largest" in the title is with regards to the size of the leak in bytes, not the size of the leak in terms of reach.
As extra data to support this, this bug has existed for at least 3 years (since the introduction of this data structure in Ghostty during the private beta). The first time I even heard about it in a way where I can confidently say it was this was maybe 3 or 4 months ago. It was extremely rare. I think the recent rise in popularity of Claude Code in particular was bringing this to the surface more often, but never to the point it rose to a massively reported issue.
Discussion upvotes, discussion activity, and Discord reorts. I read every discussion and have been doing this project specifically for a few years now. There is a stark difference between a widespread and common bug and something like this.
Like I said, this bug has existed for 3 years at this point and Ghostty is likely used by hundreds of thousands if not a million+ people daily (we don't have any analytics at all but have some side signals based on terminal reports from 3rd party CLIs). Trust me when I say that when there is a widespread issue, we hear it MUCH more loudly. :)
Dupes are not deleted, you can just search for them and see that there are not that many of those, and that's with this not being the only unsolved memory leak (https://github.com/ghostty-org/ghostty/discussions/9314 is a different one).
Not really? In your link TFAA was saying they were convinced an issue existed but the number of impacted users was limited, no maintainer experienced the issue, and they had no reproducer. As of yesterday TFAA still had no working reproducer: https://github.com/ghostty-org/ghostty/discussions/9962#disc...
In the meantime they apparently got one (edit: per their sibling comment they got it yesterday evening) and were finally able to figure out the issue.
Super weird take. Why treat the guy as if he’s a bad actor? All of the public evidence shows good faith on this issue and on the project in general. We’ve also had a clear explanation of why discussion precedes issue creation.
Only contrast I see is that he thought it was much more of a corner case which turned out to be not that true anymore since everyone started using claude code.
Ugh. Is it just me, or is anyone else feeling a tad uncomfortable that their terminal app needs a custom memory allocator that mucks with low-level page tags?
I am not sure on what your commented is based on, but in short: No? High performance software needs to deal with memory, and optimisations often will need some kind of direct control - as in this example where re-using memory is more performant than constantly churning with mmap.
A lot of developers use the terminal as their primary interaction with the computer. Nvim, tmux, etc. Having it be fast is an extreme quality of life improvement. For devs who only ever use the terminal integrated into their ide then it’s probably less important.
> Ghostty is a terminal emulator that differentiates itself by being fast, feature-rich, and native. While there are many excellent terminal emulators available, they all force you to choose between speed, features, or native UIs. Ghostty provides all three.
> In all categories, I am not trying to claim that Ghostty is the best (i.e. the fastest, most feature-rich, or most native). But when I set out to create Ghostty, I felt all terminals made you choose at most two of these categories. I wanted to create a terminal that was competitive in all three categories and I believe Ghostty achieves that goal.
> Before diving into the details, I also want to note that Ghostty is a passion project started by Mitchell Hashimoto (that's me!). It's something I work on in my free time and is a labor of love. Please don't forget this when interacting with the project. I'm doing my best to make something great along with the lovely contributors, but it's not a full-time job for any of us.
You've missed all the posts where people complain about a terminal emulator taking 1ms longer to respond to a keystroke than their preferred one, haven't you?
This is great news! Well done to everyone who helped sort it out. It was a problem noted by users in a thread here just last week, https://news.ycombinator.com/item?id=46460319
While Claude Code might have been the reason this bug became triggered by more people, there are some of us who were hitting it without ever having used Claude Code at all. Maybe the assumption about what makes a page non-standard, isn't as black-and-white as presumed. And I wonder if the leak would have been triggered more often for people who use scrollback-limit = 0, or something very small.
Probably not a huge deal, but it does seem the fix will needlessly delete and recreate non-standard pages in the case where the new page needs to be non-standard, and the oldest one (that needs to be pruned) already is non-standard and could be reused.
> Probably not a huge deal, but it does seem the fix will needlessly delete and recreate non-standard pages in the case where the new page needs to be non-standard, and the oldest one (that needs to be pruned) already is non-standard and could be reused.
This is addressed in the blog post.
It is how the PageList has always worked, and also how it worked before with the bug, because during capacity adjustment we would see the wrong size. This shouldn't change any perceived performance.
And as I note in the blog post, there are alternative approaches such as the one you suggested, but we don't have enough empirical data to support changing our viewpoint on that whereas our current viewpoint (standard sizes are common) is well supported by known benchmarks. I'm open to changing my mind here, but I didn't want to change worldviews AND fix the leak in the same go.
How come this isn't released as a hotfix / out of band patch but will follow the standard release cycle in March?
Of all the things to be impressed by you about, your patience is commendable. I'd be losing my shit if someone couldn't be bothered to read what I wrote and just spout off about something I'd addressed in my writing, but I suppose that's why your bank account has two commas and a bunch more. Thank you for everything. Can we go flying sometime?
> Well done to everyone who helped sort it out. It was a problem noted by users in a thread here just last week
I'm feeling a bit lucky I was able to sneak in an issue during the beta phase, but it was a real reproducible one that led to a segfault.
The thread about memory leak is here: https://news.ycombinator.com/item?id=46461061
And the same diagnosis in the blog post was reported by a user in discussions a month ago but ignored https://github.com/ghostty-org/ghostty/discussions/9786#disc...
As a side note - Claude Code is making the CLI attractive in a renewed fashion - more than anything else did it last 20years.
Great write-up. And, thanks mitchellh for Ghostty, I switched to it last year, and have not regretted it.
However, I am a somewhat surprised that the fix is reserved for a feature release in a couple of months. I would have expected this to be included in a bug fix release.
It's already released in the latest nightly build.
Are the nightly releases the expected way to get timely bugfixes?
That is how software releases generally work. AFAICT this is not a bug with broad impact or security implications.
The moment you started talking about pages, I was like: “Ok, obviously memory pooled” and yup, it is. Then I said “obviously ring buffered” and yeah, essentially your scroll back reuse. Then I knew exactly where the bug was before getting to that part, not freeing the pages memory properly and sure enough - bingo! With some great looking diagrams of memory space alignment.
Kudos, that was a good read. Just remember that every time you do something novel, there’s potential for leaks :D
Funny timing, I moved to Ghostty this week and just today I ran into OOM crashes in Ghostty while developing a terminal UI app. Coincidentally this TUI has a tab bar that looks like this, where UTF8 icons are used for recognizability and activity indicators (using © and € as placeholders here):
This works fine normally, but resizing the terminal would quickly trigger the crash - easy to avoid but still annoying!I was already preparing myself to file a bug report with the easy repro, but this sounds suspiciously close to what the blog post is describing. Fingers crossed :)
(EDIT: HN filters unicode, booo :( )
This feels like a case of guessing at something you could know. There are two types of allocations that each have a size and free method. The free method is polymorphic over the allocations type. Instead of using a tag to know absolutely which type an object it is you guess based on some other factor, in this case a size invariant which was violated. It also doesn't seem like this invariant was ever codified otherwise the first time a large alloc was modified to a standard size it would've blown up. It's worth asking yourself if your distinguishing factor is the best you can use or perhaps there is a better test. Maybe in this case a tag would've been too expensive.
@mitchellh what did you use for the memory visualizations? Looks nice, and the website plays well with mobile. Whats the stack?
Static HTML/CSS generated by Opus 4.5.
I like using AI for visualizations because it is one-time use throwaway code, so the quality doesn't matter at all (above not being TOTALLY stupid), it doesn't need to be maintained. I review the end result carefully for correctness because it's on a topic I'm an expert of.
I produce non-reusable diagrams namespaced by blog post (so they're never used by any other post). I just sanity check that the implementation isn't like... mining bitcoin or leaking secrets (my personal site has no secrets to build) or something. After that, I don't care at all about that quality.
The information is conveys is the critical part, and diagrams like this make it so much more consumable for people.
That's really cool. I was looking at them and thinking "I could probably make these with vanilla html/css but it'd be pretty tedious." Perfect use case for AI. I need to work on developing a reflex for it.
I've also started doing this, and it's surprisingly enjoyable to both do and even to read. The end result is often more readable to me than using a 3rd-party JS visualization library, because I only need to know standard HTML/CSS concepts to understand what's going on. And a side benefit is smaller pages with less bitrot due to being able to skip the dependencies.
That’s reasonable, thanks!
I've been following the development of Ghostty for a while and while I have the feeling that there is a bit of over-engineering in this project, I find this kind of bug post mortem to be extremely valuable for anyone in love with the craft.
Over-engineered in what way?
Having to introduce a new language stack to distributioms just to be able to build a terminal emulator is what I would consider over-engineering.
It’s just a feeling, man.
Super accessible write up as someone unfamiliar with Ghostty and terminal emulators in general. Thanks!
Reliable reproductions are so valuable.
I hate to say it, but this probably would not have happened in a garbage collected language.
GC languages are fast these days. If you don't want a runtime like C# (which has excellent performance) a language like Go would have worked just fine here, compiling to a small native binary but with a GC.
I don't really understand the aversion to GC's. In memory constrained scenarios or where performance is an absolute top priority, I understand wanting manual control. But that seems like a very rare scenario in user space.
I agree that garbage collection is fine and Go indeed has an amazing garbage collector. Unfortunately, it also has the worst type system of all mainstream languages created in the 21st century, so the benefits are rarely worth the drawbacks.
Go's type system is fine. This kind of comment is just pointless and goes against HN rules.
waiting for someone to say "this wouldn't have happen if you chose rust"
You’ll probably be waiting a long time, since Rust very explicitly doesn’t have “leak safety” as a constructive property. Safe Rust programs are allowed to leak memory, because memory leaks themselves don’t cause safety issues.
There’s even a standard, non-unsafe API for leaking memory[1].
(What Rust does do is make it harder to construct programs that leak memory unintentionally. It’s possible but not guaranteed that a similar leak would be difficult to express idiomatically in Rust.)
[1]: https://doc.rust-lang.org/std/boxed/struct.Box.html#method.l...
The specific language feature you want if you insist that you don't want this kind of leak is Linear Types.
Rust has Affine Types. This means Rust cares that for any value V of type T, Rust can see that we did not destroy V twice (or more often).
With Linear Types the compiler checks that you destroyed V exactly once, not less and not more.
However, one reason I don't end up caring about Leak Safety of this sort is that in fact users do not care that you didn't "leak" data in this nerd sense. In this nerd sense what matters is only leaks where we lost all reference to the heap data. But from a user's perspective it's just as bad if we did have the reference but we forgot - or even decided explicitly not - to throw it away and get back the RAM.
The obvious way to make this mistake "by accident" in Rust is to have two things which keep each other alive via reference counting and yet have been disconnected and forgotten by the rest of the system. A typical garbage collected language would notice that these are garbage and destroy them both, but Rust isn't a GC language of course. Calling Box::leak isn't likely to happen by accident (though you might mistakenly believe you will call it only once but actually use it much more often)
I think the main part of Ghostty's design mentioned here that - as a Rust programmer - I think is probably a mistake is the choice to use a linked list. To me this looks exactly like it needs VecDeque, a circular buffer backed by a growable array type. Their "clever" typical case where you emit more text and so your oldest page is scrapped and re-used to form your newest page, works very nicely in VecDeque, and it seems like they never want the esoteric fast things a linked list can do, nor do they need multi-writer concurrency like the guts of an OS kernel, they want O(1) pop & push from opposite ends. Zig's Deque is probably that same thing but in Zig.
The issue isn’t linked list vs dequeue but type confusion about what was in the container. They didn’t forget to drop it - they got confused about which type was in the list when popping and returned it to the pool instead of munmap.
The way to solve this in Rust would be to put this logic in the drop and hide each page type in an enum. That way you can’t ever confuse the types or what happens when you drop.
Was going to say this, but I don't think anyone actually wants to hear that Rust actually would have helped here.
As you're saying, the bug was the equivalent of an incorrectly written Drop implementation.
Nothing against Zig, and people not using Rust is just fine, but this is what happens when you want C-like feel for your language. You miss out on useful abstractions along with the superfluous ones.
"We don't need destructors, defer/errdefer is enough" is Zig's stance, and it was mostly OK.
Impossible to predict this kind of issue when choosing a project language (and it's already been discussed why Zig was chosen over Rust for Ghostty, which is fine!), so it's not a reason to always choose Rust over Zig, but sometimes that slightly annoying ceremony is useful!
Maybe some day I'll be smart enough to write Zig as a default over Rust, but until that day I'm going to pay the complexity price to get more safety and keep more safety mechanisms on the shotgun aimed at my foot. I've got plenty of other bugs I can spend time writing.
Another good example is the type vs type alias vs wrapper type debate. It's probably not reasonable to use a wrapper type every single time (e.g. num_seconds probably can probably be a u32 and not a Seconds type), but it's really a Rorschach test because some people lean towards one end versus the other for whatever reason, and the plusses/minuses are different depending on where you land on the spectrum.
[EDIT] also some good discussion here
https://ziggit.dev/t/zig-what-i-think-after-months-of-using-...
If you wanted to match Ghostty's performance in Rust, you'd need to use unsafe in order to use these memory mapping APIs, then you'd be in the exact same boat. Actually you'd be in a worse boat because Zig is safer than unsafe Rust.
Please don’t get defensive and spread silly FUD. You can be proud of what you’ve accomplished without feeling sad that a different language has strengths that yours doesn’t.
Calling unsafe mmap APIs not only is unlikely to run into the corner cases where unsafe Rust is tricky to get right, there’s “millions” of crates that offer safe APIs to do so and it’s fundamentally not hard to write it safely (it would be very hard to write it to have any issues).
And fundamentally I think Rust is much more likely to be easier to get high performance because the vast majority of safe code you write is amenable to the compiler performing safe optimizations that Zig just can’t do regarding pointer aliasing (or if it does brings all the risks of of unsafe Rust when the user annotates something incorrectly).
I don't know if this particular error would have been findable with zig-clr, but you don't need RAII. Errdefer/defer is enough, if you have an alogrithm checking your work.
> I think the main part of Ghostty's design mentioned here that - as a Rust programmer - I think is probably a mistake is the choice to use a linked list. To me this looks exactly like it needs VecDeque, a circular buffer backed by a growable array type.
This comment [0] by mitchellh on the corresponding lobste.rs submission discusses the choice of data structure a bit more:
> Circular buffer is a pretty standard approach to this problem. I think it's what most terminal emulators do.
> The reason I went with this doubly linked list approach with Ghostty is because architecturally it makes it easier for us to support some other features that either exist or are planned.
> As an example of planned, one of the most upvoted feature requests is the ability for Ghostty to persist scroll back across relaunch (macOS built-in terminal does this and maybe iTerm2). By using a paged linked list architecture, we can take pages that no longer contain the active area (and therefore are read-only) and archive them off the IO thread during destroy when we need to prune scroll back. We don't need to ever worry that the IO thread might circle around and produce a read/write data race.
> Or another example that we don't do yet, we can convert the format of scroll back history into a much more compressed form (maybe literally compressed memory using something like zstd) so we can trade off memory for cpu if users are willing to pay a [small, probably imperceptible] CPU time cost when you scroll up.
[0]: https://lobste.rs/s/vlzg2m/finding_fixing_ghostty_s_largest_...
Why not just use a circular buffer for the scroll back? Why use blocks at all if you’re just going to recycle them anyway? That said, great write-up.
It started that way, and that's a common way to do this. One of the reasons is to avoid large pre-allocations OR large copies. A few other notes over on lobsters: https://lobste.rs/s/vlzg2m/finding_fixing_ghostty_s_largest_...
Cool, thanks for the link.
Edit: I'm getting a lot of down votes for this but nobody is saying why I'm wrong. If you think I'm wrong enough to down vote, please reply why.
I don't understand why that is the preferred fix. I would have solved it other ways:
1. When resizing the page, leave some flag of how it was allocated. This tagging is commonly done as the always 0 bits in size or address fields to save space.
2. Since the pool is a known size of contiguous memory, check if the memory to be freed is within that range
3. Make the size immutable. If you want to realloc, go for it, and have the memory manager handle that boundary for you.
Both of those not only maintain functionality which seems to have been lost with the feature reduction but also are more future proof to any other changes in size.
I didn't downvote, but I suspect it's an easy answer: the fix was like four lines.
At the end of the day, #1 and #3 both probably add a fairly significant amount of code and complexity that it's not clear to me adds robustness or clarity. From the fix:
``` // If our first node has non-standard memory size, we can't reuse // it. This is because our initBuf below would change the underlying // memory length which would break our memory free outside the pool. // It is easiest in this case to prune the node. ```
https://github.com/ghostty-org/ghostty/commit/17da13840dc71b...
#3, it seems, would require making a broader change. The size effectively is immutable now (assuming I'm understanding your comment correctly): non-standard pages never change size, they get discarded without trying to change their size.
#2 is interesting, but I think it won't work because the implementation of MemoryPool doesn't seem like it would make it easy to test ownership:
https://github.com/ghostty-org/ghostty/blob/17da13840dc71ba3...
You'd have to make some changes to be able to check the arena buffers, and that check would be far slower than the simple comparison.
Thank you. I think each of my options are pretty trivial in C. I guess what I'm not understanding for #3 is if size is immutable, how the size changed which caused the issue? The post said they changed the size of the page without changing the underlying size of the allocated memory. To me this is the big issue. There was a desync in information where the underlying assumption is that size tells you where the data came from and that the size of the metadata and the size of the allocation move in tandem across that boundary.
#1 and #2 are fixes for breaking that implicit trust. #1 still trusts the metadata, #2 is what I'd consider the most robust solution is that not only is it ideally trivial (just compare if a pointer is within a range, assuming zig can do that) but it doesn't rely on metadata being correct. #3 prevents the desync.
I really don't understand the code base enough to say definitively that my ways work, which is I guess what I'm really looking for feedback on. Looking at the memorypool, I think you're right that my assumption of it being a simple contiguous array was incorrect.
ETA: I think I'm actually very wrong for #2. Color me surprised that the zig memory pool allocated each item separately instead of as one big block. Feels like a waste, but I'm sure they have their reasons. That's addCapacity in memory_pool.zig
I'm not 100%, but my understanding was that the non standard pages are always larger than the standard pages. If you need more than a standard page, you always get a freshly allocated non standard page. But when one was released, it was being treated as though it was standard sized. The pool would then reuse that memory, but only at a standard size. So every released non standard page leaked the difference between what was allocated and what was standard.
Which is to say, I don't think it was actually being resized. I think it was the metadata for the page saying it had the (incorrect) standard size (and the incorrect handling after the metadata was changed).
Yes that last point was what I meant. I see no reason that the metadata's size field should get updated without some realloc of the memory it points to. I think I'll need to look into the actual code to see what's going on there, though, because we may both be misunderstanding. It just seems very error prone to categorize how you free memory based on a field that by the time you get to `free` has no guaranteed relationship with where the memory came from. I think that should be fixed. What was done in the blog is more of a band-aid imo.
I upvoted you because I would like to know the response to these approaches
Thank you. Sometimes I get to like -4 or even -7 before it starts going up. It might be nice to graph it at some point to see my most varied comments. I'm at -2 right now
23 minutes later I'm at +2
6 minutes after, +5 +4min now +6, another 20 minutes +8. I think I'm in the clear
I just stopped caring about votes. It's often driven by inertia, and it can't differentiate a vote from someone who doesn't know anything vs a domain expert. Life is better once you stop caring about karma points.
While very true and sound advice, fake internet points make dopamine go brrrrr
Would this kind of bug have been catched by the Rust compiler?
I was wondering about this myself. My guess is no, since AFAIK the only way to do this sort manual memory management is to use unsafe code. But there's also things like the (bumpalo)[https://docs.rs/bumpalo/latest/bumpalo] crate in Rust, so maybe you wouldn't need to do this sort of thing by hand, in which case you're as leak-free as the bumpalo crate.
speaking of claude code in Ghostty, I’ve noticed I can’t drag and drop images into the prompt when the session is within a tmux pane. I miss that, coming from the mac terminal app, which allowed me to do so. I’d be willing to look into this myself, but mention it in case someone already knows where to start looking.
I wonder how a Rust-based terminal implements this without sacrificing performance.
Someone check out alacritty source code and answer it for us
Ask Claude Code about it using Ghostty without this fix ;)
The number of people here on HN gaslighting those that said they ran into this bug an challenging them to prove it was real..
As you could see from TFA, getting a reliable reproduction case was the tricky part of fixing this bug, so "asking to prove it's real" is just a mean way of saying asking for reproduction steps, not gaslighting.
It only took using claude code or other emoji heavy apps to reproduce and the memory grows linearly over time https://github.com/ghostty-org/ghostty/discussions/9786
There are times where is just makes sense to read, measure and really understand why leaks, bugs and performance issues happen and vibe-coders will get stuck on this very quickly.
This excellent write-up from michellh explains the issue in depth and all his blogs in building Ghostty are a recommended read on the Ghostty's internals.
Similarly, these write-ups are a great read. Here is another one that documents a goroutine leak and how it was detected, fixed without restarting production. [0]
This is what most vibe-coders will NOT do when faced with a non-trivial issue, with a serious software product.
[0] https://skoredin.pro/blog/golang/goroutine-leak-debugging
The contrast between the attitude here https://news.ycombinator.com/item?id=46461860 and in this story is a bit wacky to me.
What contrast? I stand by what I said there. I just re-read every point and I would say the same thing today and I don't think my blog post contradicts any of that?
A user came along and provided a reliable reproduction for me (last night) that allowed me to find and fix the issue. Simultaneously they found the same thing and produced a similar fix, which also helped validate both our approaches. So, we were able to move forward. I said in the linked comment that I believed the leak existed, just couldn't find it.
It also was fairly limited in impact. As far as Ghostty bugs go, the number of upvotes the bug report had (9) is very small. The "largest" in the title is with regards to the size of the leak in bytes, not the size of the leak in terms of reach.
As extra data to support this, this bug has existed for at least 3 years (since the introduction of this data structure in Ghostty during the private beta). The first time I even heard about it in a way where I can confidently say it was this was maybe 3 or 4 months ago. It was extremely rare. I think the recent rise in popularity of Claude Code in particular was bringing this to the surface more often, but never to the point it rose to a massively reported issue.
[flagged]
Discussion upvotes, discussion activity, and Discord reorts. I read every discussion and have been doing this project specifically for a few years now. There is a stark difference between a widespread and common bug and something like this.
Like I said, this bug has existed for 3 years at this point and Ghostty is likely used by hundreds of thousands if not a million+ people daily (we don't have any analytics at all but have some side signals based on terminal reports from 3rd party CLIs). Trust me when I say that when there is a widespread issue, we hear it MUCH more loudly. :)
Could you please follow the HN guidelines when posting here? They include "assume good faith." and "don't cross-examine".
https://news.ycombinator.com/newsguidelines.html
Will do my best :)
Appreciated!
Dupes are not deleted, you can just search for them and see that there are not that many of those, and that's with this not being the only unsolved memory leak (https://github.com/ghostty-org/ghostty/discussions/9314 is a different one).
Not really? In your link TFAA was saying they were convinced an issue existed but the number of impacted users was limited, no maintainer experienced the issue, and they had no reproducer. As of yesterday TFAA still had no working reproducer: https://github.com/ghostty-org/ghostty/discussions/9962#disc...
In the meantime they apparently got one (edit: per their sibling comment they got it yesterday evening) and were finally able to figure out the issue.
edit: https://github.com/ghostty-org/ghostty/discussions/10244 is where it was cracked.
There are some really strange people on HN.
I sure hope so!
I think there's only a perceptible "attitude" difference if you are fired up by the fact that they are conservative about using the "issues" tab.
Super weird take. Why treat the guy as if he’s a bad actor? All of the public evidence shows good faith on this issue and on the project in general. We’ve also had a clear explanation of why discussion precedes issue creation.
Only contrast I see is that he thought it was much more of a corner case which turned out to be not that true anymore since everyone started using claude code.
"Please respond to the strongest plausible interpretation of what someone says, not a weaker one that's easier to criticize. Assume good faith."
https://news.ycombinator.com/newsguidelines.html
Presumably that discussion is the reason this was fixed. Very bizarre bug tracking policy IMO.
No, the reason it was fixed is that somebody managed to reliably reproduce the issue: https://github.com/ghostty-org/ghostty/discussions/10244
As you can see, there's no hint or evidence they even are on HN let alone saw that discussion.
Ugh. Is it just me, or is anyone else feeling a tad uncomfortable that their terminal app needs a custom memory allocator that mucks with low-level page tags?
I am not sure on what your commented is based on, but in short: No? High performance software needs to deal with memory, and optimisations often will need some kind of direct control - as in this example where re-using memory is more performant than constantly churning with mmap.
I honestly don't understand why a terminal emulator needs to be performant. Seems like peak bikeshedding to me.
A lot of developers use the terminal as their primary interaction with the computer. Nvim, tmux, etc. Having it be fast is an extreme quality of life improvement. For devs who only ever use the terminal integrated into their ide then it’s probably less important.
Can you elaborate on that a bit, please?
I have never found myself in the situation where my terminal emulator would be too slow and I‘m using it for the majority of my day-to-day work.
I honestly never ran into a situation where I would habe blamed the terminal emulator for being too slow.
https://ghostty.org/docs/about
> Ghostty is a terminal emulator that differentiates itself by being fast, feature-rich, and native. While there are many excellent terminal emulators available, they all force you to choose between speed, features, or native UIs. Ghostty provides all three.
> In all categories, I am not trying to claim that Ghostty is the best (i.e. the fastest, most feature-rich, or most native). But when I set out to create Ghostty, I felt all terminals made you choose at most two of these categories. I wanted to create a terminal that was competitive in all three categories and I believe Ghostty achieves that goal.
> Before diving into the details, I also want to note that Ghostty is a passion project started by Mitchell Hashimoto (that's me!). It's something I work on in my free time and is a labor of love. Please don't forget this when interacting with the project. I'm doing my best to make something great along with the lovely contributors, but it's not a full-time job for any of us.
Scrolling and searching through megabytes of output is often useful. Sometimes you don't expect it and can't prepare for it in advance.
You've missed all the posts where people complain about a terminal emulator taking 1ms longer to respond to a keystroke than their preferred one, haven't you?
Frankly, I wish more software prioritized performance this much.
What's the best claude code terminal? I'm not sure if ghostty is it, which one can sync to iphone / android tablet for remote use of the same session?